Votos - 3, Puntuación media: 4.3 ( )

Fabricar: ABC Office Tamaño del archivo: 297.08 kb Nombre del archivo: Idioma del manual:

Continue feeding paper into the Feed Opening until the shredding mechanism begins to draw the paper in. At this point, allow the paper to feed into the shredder on its own. Once the paper has passed completely through the shredding mechanism, the electronic controls will automatically stop the machine. Microfiche and transparencies can also be shredded in the same manner as paper, however, you should shred a piece of paper after every 8 or 10 sheets of plastic. This helps clean plastic particles out of the shredding mechanism. CAPACITY Capacity is the number of sheets of 8 .” x 11” paper that can be shredded at one time. These figures are approximate and machines may vary slightly due to various conditions. It is not recommended that you try to run your shredder at maximum capacity, as this increases the chance of a paper jam. Model 20 Lb. Bond 16 Lb. Bond 20404 16 20 20414 12 15 20422 10 12 20430 5 6 20434 4 6 20506 25 30 20514 12 15 CLEARING A PAPER JAM If too many sheets of paper are fed into your shredder at one time, it may cause a paper jam. Running your shredder at maximum capacity increases the chance of a paper jam. If a paper jam occurs, it is easy to clear by following these simple steps: Turn shredder off using ON/OFF/ REVERSE switch ( 3) Firmly pull on paper sticking out of Feed Opening while holding ON/OFF/REVERSE switch in the REVERSE (R) position. After paper has been removed from the Feed Opening, move the ON/OFF/REVERSE switch back to the ON (I) position. Separate some of the sheets and continue shredding. ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME (text) abcoffice (text) (800) 658-8788 IT IS NOT RECOMMENDED RUNNING SHREDDERS AT MAXIMUM CAPACITY ...

Descargar ahora

Introduzca dos números de la imagen: