Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
• Leave the key for the safety lock with the person responsible for the cutting machine. • Power operated cutting machines must be operated only by trained and reliable personnel. Part of the training is to become familiar with the operating instructions. • The operating instructions must be accessible at any time and must be strictly observed. • Do not reach into cutting area while the knife is in operation. • Change knife and cutting stick only with the main switch in “off” position. For other maintenance and repair, which requires removal of machine covers, always disconnect the plug. • Defects in or damage to cutting machines, which affect the safety, must be repaired immediately. Until such faults have been eliminated, the cutting machine must be put out of operation. • Annual routine inspection by specially trained service technicians are recommended for all safety devices, particularly the electrical control measures in the cutting machine. Records should be kept of these safety inspections. • Transportation of knives is only allowing specially designed wooden cases supplied by your local distributor. When inserting knife into the wooden case, ensure that the sharp edge lies flush with that side of the case into which the holes for the securing screws have been drilled. • IMPORTANT – The safety rules must be strictly observed. Please make sure that you are familiar with the operation of the paper cutter. Installation The entire machine is dispatched in one package, but the stand (#7) and the hand wheel (#19) for the paper clamp have been dismounted from the machine. The tool box contains: -a set of tools for service and maintenance, -the mounting hardware for the stand, -the back gauge crank (#3) with a mounting screw, -two keys for the safety lock. • Place machine (#1) on stand (#2). • Insert securing bolts for the stand into provided holes and secure with nuts. • Place paper tray (#8) into the stand (#7). • Mount the hand wheel for the paper clamp (#19) and the crank for the back gauge (#3). Secure these parts with provided screws. • Connect power cord with plug to a normal single phase AC socket. The machine is now ready to be operated. Performance All paper qualities and light cardboard can be cut using the full cutting height and cutting length of the machine. 4810 4810-11 5210 Cutting Length 475 mm (18-3/4”) 520 mm (20-1/2”) Cutting Height 80 mm (3-1/8”) 80 mm (3-1/8”) Table depth 460 mm (18-1/8”) 520 mm (20-1/2”) Narrow cut 30 mm (1-3/16”) 35 mm (1-3/8”) Features and Operation • Main Switch (#11) 3 Turn main switch (#11) to position “|” (on), in order to begin operation. The main switch can be sued as an EMERGENCY SWITCH, which stops the machine immediately. · Safety lock with key (#6) The key can be removed to prevent unauthorized use. To activate the machine, turn key 45. to the right. · Re-set button (#12) Before the knife can be activated on models IDEAL 4810 and IDEAL 5210, the re-set button has to be pressed to re-establish th...
Otros modelos de este manual:Trituradora, - Ideal Cutter 4810-11 (75.77 kb)
Trituradora, - Ideal Cutter 5210 (75.77 kb)
Trituradora, - Ideal Cutter 4810 (75.77 kb)
Trituradora, - Ideal Cutter 4810-11 (75.77 kb)