Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
CAUTION: The shredder may be damaged if you alternate too rapidly between forward and reverse. • Unplug shredder and remove wastebasket drawer (A). – Carefully clear any paper shreds that have collected on under side of paper entry (C). CAUTION: Model 120C-2 (confetti cut model) has exposed blades.Use care when removing paper shreds on underside of paper entry. To clear a paper jam If paper jam light (J) is on, follow these steps until light turns off. • Check the waste basket and empty if full. •Press and hold control switch (E) in the reverse [R] position to back paper out of paper entry (C). Try pulling gently on paper to remove it from shredder. • Alternate between forward and reverse, if needed: – Press and hold manual forward button (G) for a few seconds. – Press and hold control switch (E) in the reverse [R] position for a few seconds. – Continue alternating between forward and reverse until the jam clears. CAUTION: The shredder may be damaged if you alternate too rapidly between forward and reverse. Maintenance Empty waste basket regularly to ensure the smooth functioning of the cutting cylin- ders. The shredder will not operate when the basket is full. Oil confetti-cut model (120C-2) regularly to ensure proper operation. If used at or near daily capacity, apply oil every time you empty the basket. Use Fellowes Powershred Lubricant #35250 or other non-aerosol vegetable- based oil in a long-nozzle container (sample oil provided). CAUTION: Do not use flammable synthetic oil, petroleum-based products, or aerosol lubricants of any kind. To oil the cutting cylinders • Apply oil over full width of cutting cylinders through the paper entry (C). •Press and hold the manual forward button (G) for at least 3 seconds. •Press and hold the control switch (E) in reverse [R] for at least 3 seconds. • Repeat the forward/reverse sequence 3 or more times. 2 1 3 2 1 3 6 EnglishTroubleshootingIf there is a problem with your shredder, check these symptoms and remedies. If you can- not solve the problem, call your local dealer or contact Fellowes directly. Do not open shredder head to attempt repair. You could be exposed to serious electric shock and will void the warranty. Symptom Ready Light (F) will not light Shredder does not start or stops while shredding Basket ajar light (H) is on Basket full light (I) is on Paper jam light (J) is on Confetti-cut shredder (120C-2): Shredder sheet capacity decreases, noise level increases, or cutting cylinders stop with a squeak or rubbing sound Shredder runs for a few seconds after the paper has cleared the cutters Remedy Make sure shredder is plugged in and the control switch (E) is in the automatic [I] position. • Make sure shredder is plugged in and control switch (E) is in the automatic [I] position. • Shredder is jammed. Follow the instructions under Operation. Make sure the waste basket drawer (A) is all the way into the cabinet. Empty the waste basket. Follow the instructions under Operation. Clear the paper jam. Follow the instructions under Operation. Oil the cutting cylinders. Follow the instructions under Maintenance. No action required. This is a self-cleaning function. SuppliesThe following items for the 120-2 and 120C-2 shredders are available from Fellowes: Item Quantity Part Number Waste bags (in dispenser) 50/roll 36054 Waste basket (box) 1 box 400008 Powershred Lubricant (120C-2 only) 12 oz. bottle 35250 To purchase supplies, contact Fellowes at the appropriate location listed on the back page of this instruction manual, or visit us at English Fellowes conducts extensive testing to ensure that these shredders are capable of meeting all of the specifications listed in the Product Profile (see page 3). However, the actual sheet capacity is dependent on a number of factors including the type and weight of paper, the humidity, the voltage level of the power source, the temperature of the motor, and the care with which the operator feeds the paper. Safety agency testing is conducted to ensure that the shredder will operate to specifications even if the available voltage is 10% below or 6% above the rated voltage. During this testing 2.5 minutes was taken to empty the basket each time it filled and the following capacities were used for temperature rise testing: Cut Size Number Paper Size Voltage Hertz & Type of Sheets & Weight 220-240 VAC 50 Hz 3,9 mm Strip Cut 17 A4 70 g 220-240 VAC 50 Hz 5,8 mm Strip Cut 19 A4 70 g 220-240 VAC 50 Hz 3,9 mm Confetti Cut 13 A4 70 g 120 V 60 Hz 5,8 mm Strip Cut 19 8.5x11 20 lb 120 V 60 Hz 3,9 mm Confetti Cut 13 8.5x11 20 lb 100 V 50/60 Hz 3,9 mm Strip Cut 17 A4 70 g 100 V 50/60 Hz 3,9 mm Confetti Cut 13 A4 70 g Limited Warranty Fellowes, Inc. ("Fellowes") warrants the cutting blades of the machine to be free from defects in material and workmanship for 20 years from the date of purchase by the original consumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 2 yea...
Otros modelos de este manual:Trituradora, - 120-2 (518.73 kb)