Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Tighten the nut (II). Retighten the set screw (I). Installation The Model IDEAL 1036 does not need any assembly. On models IDEAL 1035 and IDEAL 2035 the clamp with the attached knife guard (#1) has been taken off for shipping. For re-assembling proceed as follows: Turn out screws on fixing points. Place knife guard (A) with attached clamp bar on machine as illustrated. The knife guard must be caught behind the guiding screw (B) on knife-carrier. Turn screws into fixing points (don’t tighten). Adjust knife guard to sit close to the knife and tighten screws. Operation This model is equipped with hand clamp (#3) which holds paper when cutting. Models IDEAL 2035 and 1036 are fitted with an automatic clamp, which goes up and down with the movement of the knife....
Otros modelos de este manual:Trituradora, - IDEAL Cutters 1035 (138.51 kb)
Trituradora, - IDEAL Cutters 1036 (138.51 kb)
Trituradora, - IDEAL Cutters 2035 (138.51 kb)
Trituradora, - IDEAL Cutters 1036 (138.51 kb)