Votos - , Puntuación media: ( )

Manual de usuario Linear, modelo DXS-23

Fabricar: Linear
Tamaño del archivo: 109.78 kb
Nombre del archivo:

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

To send a complete signal, press the transmitter button for a minimum of 2 seconds. The digital DXS code format features over a million possible codes. The DXS transmitters are precoded at the factory to unique codes, so no field coding is required. The multi-button transmitters send variations of their preset codes depending on which buttons are pressed. Transmitters can send a signal for up to 10 seconds per activation. The transmitters are supervised for low battery and send hourly status reports. Some receivers are able to use these signals, others are not. Receivers must be programmed to the transmitter code before system testing and operation. Refer to the receiver’s instructions for details on operation and programming. Each transmitter is powered by two self-contained type 2032 3-volt lithium batteries (included). When the batteries voltage gets low, a low battery report is sent with any alarm or status report to notify the receiver. The red LED will blink when the transmitter is activated with low batteries. A removable pocket clip and belt clip are provided for each transmitter. Either can be attached to the back of the transmitter allowing the unit to be clipped to shirt pocket or slid onto a belt. The top button on each transmitter can be hidden with the top button cover supplied with each unit. TRANSMITTER CONFIGURATIONS DXS-21 The DXS-21 is a two-button, one-code transmitter. Pressing either the round button on the transmitter’s front, or the small button on the transmitter’s top will send the same signal. DXS-23 The DXS-23 is a three-button, four-code transmitter. Pressing either of the transmitter’s front buttons sends codes one and two. Pressing the small button on the transmitter’s top sends code three. Pressing both front buttons together sends code four. DXS-25 The DXS-25 is a five-button, eight-code transmitter. Pressing any of the transmitter’s front buttons sends codes one through four. Holding down the small button on the transmitter’s top together with pushing with any of the front buttons sends codes five through eight. DXS-21 FEATURES DXS-23 FEATURES DXS-25 FEATURES BATTERY REPLACEMENT POCKET & BELT CLIP/TOP BUTTON COVER LINEAR LIMITED WARRANTY This Linear product is warranted against defects in material and workmanship for twelve (12) months. The Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Linear Corporation for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation. All implied warranties, including implied warran...