Votos - 4, Puntuación media: 3.5
(
)
)
|
Fotos y especificaciones Juki HZL-25Z |
Resumen del manual
Always unplug this sewing machine from the electric outlet immediately after using and before cleaning.” 2. “Always unplug before replacing light bulb. Replace bulb with same type rated 15 watts.” “WARNING- To reduce the risk of burns, fire, electric shock, or injury to persons: ” 1. “Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children.” 2. “Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual.” 3. “Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.” 4. “Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth.” 5. “Never drop or insert any object into any opening.” 6. “Do not use outdoors.” 7. “Do not operate where aerosol (spray) products are being used or where oxygen is being administered.” 8. “To disconnect, turn switch to the off (“0”) position, then remove plug from outlet.” 9. “Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.” 10. “Keep fingers away from all moving parts. Special care is required around the sewing machine needle.” 11. “Never sew with a damaged needle plate as this can cause needle to break.” 12. “Do not use bent needles.” 13. “Do not pull or push fabric while stitching. It may deflect the needle causing it to break.” 14. “Switch the sewing machine off (“0”) when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.” 15. “Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.” A I ITIOM Moving parts-To reduce risk of injury, switch off before servicing. Close cover before operating machine.” “SAVE THESE INSTRUCTIONS” “This product is for household use, or equivalent.” FOOT CONTROLLER (120 V only) Use Yamamoto Electric, Model YC-482E with this sewing machine. POLARIZED PLUGS CAUTION (120 V only) This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. This appliance complies with EEC Directive 89/336/EEC covering the electromagnetic compatibility. This equipment is marked with the recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This will benefit the environment for all. (European Union only) 1 IMPORTANTES INSTRUCCIONES DE SEGURIDAD Cuando se usa un aparato eléctrico, debe seguirse unas precauciones básicas y que vienen incluidas a continuación. "Leer las instrucciones antes de usar la máquina de coser." — Para reducir el riesgo de una descarga eléctrica. 1. La máquina no debe dejarse nunca desatendida mientras esté conectada. Desconectar la máquina de la red eléctrica inmediatamente después de su uso y antes de limpiarla. 2. Desconectar la máquina de la red antes de cambiar la bombilla. Colocar una bombilla del mismo tipo con una potencia de 15 Watios. 1. No usar la máquina como un juguete. Prestar atención si fuese necesario cuando la máquina está siendo usada por niños o cerca de ellos. 2. Usar la máquina de coser solamente como se describe en este manual. Usar únicamente los accesorios recomendados por el fabricante y que vienen especificados en este manual. 3. No trabajar nunca con la máquina en caso de que tenga el cable o el enchufe en malas condiciones, si no cose correctamente, en caso de que se haya caído, haya sido dañada o se haya mojado. 4. No usar la máquina con los orificios de ventilación bloqueados. Mantener los orificios de ventilación de la máquina de coser y el pedal sin acumulación de polvo, suciedad y restos de tejido. 5. No introducir no insertar objetos en los orificios de ventilación. 6. No usar al aire libre. 7. No usar mientras se estén utilizando productos aerosoles (spray) o en lugares donde se esté administrando oxigeno. 8. Para desconectar, girar el interruptor hasta la posición Off ( "0" ), luego desconectar el enchufe de la red. 9. No desconectar el enchufe tirando del cable. Para desconectar, tirar de la clavija, no del cable. 10. Mantener los dedos alejados de todas las partes movibles de...