Votos - 2, Puntuación media: 5 ( )

Fabricar: Brother Tamaño del archivo: 3.21 mb Nombre del archivo: Idioma del manual:

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Attaching the Embroidery Unit — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Attaching the Embroidery Unit This section describes how to attach the embroidery unit. Embroidery unit precautions CAUTION . Do not move the sewing machine with the embroidery unit in place. The embroidery unit may be dropped and cause injury. . Keep your hands and other objects away from the embroidery carriage and frame. Otherwise injury may result. Note • Do not touch the connector in the embroidery unit connector slot. The connector could be damaged, and it may cause malfunctions. • Do not lift up on the embroidery carriage, and do not forcefully move it. It may cause malfunctions. a a Carriage Attaching the embroidery unit Get the included embroidery unit ready. Turn off the sewing machine. a Note • Always turn off the sewing machine before attaching the embroidery unit. It may cause malfunctions. b Pull the flat bed attachment off to the left. a a Flat bed attachment 4 Attaching the Embroidery Unit 123 EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Slide the embroidery unit onto the sewing machine arm. Push it in until it clicks and stops. • The embroidery unit is attached. Note • Make sure that there is no gap between the embroidery unit and the sewing machine, otherwise the embroidery pattern may not be sewn correctly. Be sure to fully insert the connector into the connection port. • Do not push on the carriage when attaching the embroidery unit to the machine, otherwise damage to the embroidery unit may result. d Turn on the sewing machine. • The confirmation message is displayed. Be sure that no objects or hands are near the e embroidery unit and press . ..The carriage moves to its initial position. a a Carriage CAUTION . Do not put your hands or other objects near the carriage. It may cause injury. Note • If the machine is initialized with hands or objects near the carriage, the screen may return to the initial display. After removing whatever is near the carriage, turn the power on again. • The screen for selecting the embroidery pattern type is displayed. Memo ..Utility stitches cannot be selected when the embroidery unit is attached. ..For details on the embroidery patterns, refer to "Selecting Embroidery Patterns" (page 132). — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Removing the embroidery unit Make sure that the sewing machine is completely stopped and follow the instructions below. Remove the embroidery frame. a • For details on removing the embroidery frame, refer to "Removing the embroidery frame" (page 131). b Press , and then press . ..The embroidery carriage moves into a position where it can be saved. Turn off the sewing machine. c d Hold the release button on the bottom left of the embroidery unit, and slowly pull the embroidery unit to the left. 4CAUTION a a Release button • The embroidery unit separates from the sewing machine. . Do not carry the embroidery unit by holding the carriage. It may cause malfunctions. CAUTION . Always turn off the sewing machine before removing the embroidery unit. It may cause malfunctions if removed when the machine is turned on. Attaching the Embroidery Unit 125 EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Preparing the Fabric After attaching a stabilizer material to the embroidery fabric, it is stretched on an embroidery frame. Attaching a stabilizer material to the fabric Attach a stabilizer material for embroidery to the fabric to prevent poor quality embroidery designs. Memo • We recommend the optional stabilizer material for embroidery. Use a water soluble sheet on thin materials like organdy and fabrics with a nap like towels. To obtain optional accessories or parts, visit [or [(in USA). CAUTION . Always use stabilizer material when sewing embroidery projects. The needle may break or bend if you embroider without using a stabilizer material for thin fabrics or stretch fabrics. Furthermore, the pattern may be sewn incorrectly. Prepare stabilizer material that is larger than a the embroidery frame being used. a c b a Fabric b Size of embroidery frame c Stabilizer material b If you are using stabilizers with adhesive, place the adhesive surface of the stabilizer material against the wrong side of the fabric, and iron it with a steam iron. 1 2 3 a Stabilizer material b Fabric (wrong side) c Attached surface • When it cannot be ironed or placed in the hoop For fabrics, such as towels, which cannot be ironed or for embroidering in places where ironing is difficult, place the stabilizer material under the fabric, and stretch the fabric in the embroidery frame ...

Descargar ahora

Introduzca dos números de la imagen: