Votos - 5, Puntuación media: 4.4
(
)
)
|
Resumen del manual
114-55 and 114-56 A TRADE MARK OF THE SINGER MANUFACTURING COMPANY INSTRUCTIONS FOR OILING To ensure easy running and prevent unnecessary wear of the parts which are in movable contact, the machine requires oiling and when in continuous use, "TYPE B" or "TYPE D" OIL, sold only by Singer Sewing Machine Company, should be applied at least twice each day to all oil holes marked "OIL," as instructed in Form 20174. "TYPE D" OIL is stainless. Copyright, U. S. A., 1940 and 1952 by The Singer Manufacturing Company All Rights Reserved for All Countries INDEX Page Attachments and Accessories..............................................16 Button Spacing Guide (Adjustable) 16 Machine No. 114-55 7 Machine No. 114-56..................................................................................15 Numerical List of Parts 19 Starting Lever ..........................................17 Table Belt Guide 17 Thread Unwinder 17 INSTRUCTIONS FOR ORDERING In ordering from this list, use ONLY the part NUMBER in the FIRST column. The number stamped on a Sewing Machine Part is in every case the number of the single part only. Every combination of parts sent out as such has its specific number, which, although not stamped on the parts, must be used when ordering the combination. Each number always indicates the SAME PART in whatever list it appears, or for whatever machine. The letters after some of the numbers indicate the style of finish only, as follows: A—Hardened, Polished, Nickel Plated and Buffed A.A—Buffed and Chromium Plated A.B—Hardened, Polished, Buffed and Chromium Plated A.C—Brown Baking Enamel Finish A.D—Gray Baking Enamel Finish A.E—Hardened, Bright Rumbled and Nickel Plated A.F—Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated A.G—Alumilite, Plain A.H—Alumilite, Dyed A J—Polished, Nickel Plated and Chromium Plated A.K—Hardened, Polished, Nickel Plated and Chromium Plated A.L—Heat Treated for Toughness B—Polished, Nickel Plated and Buffed C—Hardened Only C.R—Hardened and Merlized D—Polished Only E—Soft, Not Polished F—Hardened and Polished F.J—Hardened, Polished and Nickel Plated G—Bright Rumbled and Nickel Plated H—Blued J—Nickel Plated Only K—Hardened and Nickel Plated L—Brass Plated M—Oxidized N—Japanned, Dull P—Japanned, Bright P.P—Wrinkle Finish R—Merlized S—Cadmium Plated T—Copper Plated T.A—Hardened, Polished, Copper and Nickel Plated and Buffed T.B—Copper and Nickel Plated and Polished T.J—Copper and Nickel Plated Only T.K—Hardened, Copper and Nickel Plated T.L—Copper and Brass Plated T.M—Copper Plated and Oxidized INSTRUCTIONS FOR ORDERING-Continued U—Zinc Plated V—Silver Plated W—Polished and Nickel Plated X—Black Oxide, for Iron and Steel X.C—Hardened and Black Oxide, for Iron or Steel V—Black Nickel Plated Only Z—Chromium Plated Z.A—Hardened, Polished, Nickel Plated, Buffed and Chromium Plated Z.B—Polished, Nickel Plated, Buffed and Chromium Plated Z.C—Hardened and Chromium Plated Z.D—Polished and Chromium Plated Z.G—Bright Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated Z.J—Nickel and Chromium Plated Z.T—Copper and Chromium Plated These letters MUST BE USED when they appear in the list; and AFTER the number as in the list. In this series: 1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw Numbers 1501 to 1800 and 51501 to 51800 are Nut Numbers 1801 to 2000 and 51801 to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to 190000 are Sewing Machine Parts, 190001 and upward are numbers of Electrical Parts. The figures in the second column refer only to the plates, illustrating the parts, and are NOT TO BE USED in ordering. Parts marked with an asterisk (*) are furnished only when repairs are made at factory. SINGER Needles should bo used in SINGER Machines. These Needles and their Containers are marked with the Company's Trade Mark “SIMANCO.**" 1 Needles in Containers marked “FOR SINGER MACHINES” are NOT SINGER made needles. 2 SINGER Needles should be used in SINGER Machines. These Needles and their Containers are marked with the Company's Trade Mark “SIMANCO.1 Needles in Containers marked "FOR SINGER MACHINES” are NOT SINGER made needles. 2 7 LIST OF PARTS COMPLETE FOR MACHINE No. 114-55 FOR SEWING TWO OR FOUR-HOLE BUTTONS, FROM 14 TO 24 LIGNE. MAKES TWO PARALLEL BARS IN FOUR-HOLE BUTTONS WITH A RIGHT ANGLE CROSS-OVER STITCH. 21 STITCHES. BUTTON CLAMP VIBRATES ACROSS THE CYLINDER. BREAKS THREAD AUTOMATICALLY. SPEED 1500 R.P.M. No. *136654 136655 16532 4448 56015 136594 880E 59702 17703 50333AL 1520J 4449 59703 1036AL 59704 59705 446AL 59706 446AL 59707 Plate 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 23193 Name Arm........-......................... ...................................... ..... Arm 136654 with 4449, 136672 and two 164E—.............. Arm Dowel Pin (2).......................................
Otros modelos de este manual:Máquinas de coser - 114-56 (1.69 mb)