Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
Please read it carefully and keep it handy for further reference. TABLE OF CONTENTS Page Important Safety Instructions.................................. 3 Assembling The Stand....................................... 4 Part Names................................................ 6 Getting Started 1. Basic Operations.................................... 8 2. Transpose......................................... 9 3. Touch Response.................................... 9 4. Demonstration Songs............................... 10 Digital Recording Functions 1. Easy Recording.................................... 11 2. Playing Back A Song............................... 11 3. Advanced Recording/Playback Functions............... 12 4. Deleting A Song/Track.............................. 14 Programming Mode 1. Selecting A Touch Type............................. 15 2. Tuning........................................... 16 3. MIDI Channel Select............................... 16 4. Turning Sending Program Number On And Off........... 17 5. Turning Multitimbre On And Off...................... 17 6. Local Control On And Off........................... 17 7. Reset............................................ 18 MIDI .................................................. 19 SPECIFICATIONS......................................... 21 MIDI IMPLEMENTATION CHART........................... 22 - 2 - IMPORTANT SAFETY INSTRUCTIONS WARNING - When using electric products, basic precautions should always be followed, including the following: 1. Read all the instructions before using the product. 2. Do not use this product near water - for example, near a bathtub, in a wet basement, near a swimming pool, or the like. 3. This product, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level. If you experience any hearing loss or ringing in the ears, you should consult a hearing specialist. 4. Place the AC power adaptor so that its location or position does not interfere with its proper ventilation. 5. The product should be located away from heat sources such as radiators, heat registers, or other products that produce heat. 6. This product should be located away from electrical motors, neon signs, fluorescent light fixtures, and other sources of electrical noise. 7. The product should be connected only to the type of power supply described on the product. 8. The AC power adaptor may be equipped with a polarized line plug. This is a safety feature. If you are unable to insert the plug into the outlet, we suggest that you contact an electrician to replace your outlet with a safer one. 9. The power supply cord should be unplugged from the outlet when the product is left unused for a long period of time. 10. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 11. The product should be serviced by qualified service personnel when: - The power supply cord or the plug has been damaged. - Objects have fallen, or liquid has been spilled into the product. - The product has been exposed to rain. - The product does not appear to operate normally. - The product has been damaged. 12. Do not disassemble or attempt to modify the product. - 3 - ASSEMBLING THE STAND Be sure that all parts are included before starting to assemble your unit. PARTS PROVIDED Side Panel (A)................2 pcs. Back Panel (B)..............1 pc. Pedal Board (C)............1 pc. Toe Block (D)................2 pcs. Screw (E, extra long) . . 4 pcs. Screw (F, long)..............8 pcs. Screw (G, middle)..........3 pcs. Screw (H, short)............4 pcs. Washer (I)......................4 pcs. Spring Washer (J)..... 4 pcs. Round Nut (K)....... 4 pcs. Adjuster (L)......... 1 pc. (F) (G) (H) (K) ss Ö 1. Insert the round nuts (K) into the holes of Side Panel (A) with keeping the nut’s hole vertical. Insert the screws (E) into the spring washer and washer. Put (A) to Toe Block (D) and fasten with four screws (E) from the bottom. - 4 - Side view Rear view (B) 3. Hold (B) behind (A) and (C). Fasten (A) and (B) with four screws (H) and with three screws (G). 4. Place the piano on the stand. Then, slide the piano backward to place it at the appropriate point for screws. Hold the piano on the stand so that it doesn’t fall from the stand. Then fasten the piano and the stand with four long screws. CAUTION: Be sure to secure the piano to the stand with the screws. If you fail to do so, the unit could fall from the stand causing damage or personal injury. 5. Insert the pedal connection cord that comes from Pedal Board (C) into the piano’s pedal jack and fasten with clamps 6. Turn the adjuster (installed on the bottom of C) until it touches the floor to support the pedal board. - 5 - PART NAMES POWER BUTTON (A) T...
Otros modelos de este manual:Sintetizadores / piano - Digital Piano PN60 (212.83 kb)
Sintetizadores / piano - Digital Piano PN80 (212.83 kb)