Votos - 3, Puntuación media: 4 ( )

Fabricar: Casio Tamaño del archivo: 2.34 mb Nombre del archivo: Idioma del manual:

Turn on operation lock when you want to protect against unintentional button operations. • The operation lock setting cannot be changed while Music Library playback is in progress, while the metronome is sounding, and during recording. English E-23 Connecting to a Computer Connecting to a Computer You can connect the Digital Piano to a computer and exchange MIDI data between them. You can send play data from the Digital Piano to music software running on your computer, or you can send MIDI data from your computer to the Digital Piano for playback. Minimum Computer System Requirements The following shows the minimum computer system requirements for sending and receiving MIDI data. Check to make sure that your computer complies with these requirements before connecting the Digital Piano to it. • Operating System Windows® XP (SP2 or later)*1 Windows Vista® *2 Mac OS® X (10.3.9, 10.4.11 or later, 10.5.6 or later) *1: Windows XP Home Edition Windows XP Professional (32- bit) *2: Windows Vista (32- bit) • USB port IMPORTANT! • Never connect to a computer that does not conform to the above requirements. Doing so can cause problems with your computer. Connecting the Digital Piano to Your Computer IMPORTANT! • Make sure you follow the steps of the procedure below exactly. Connecting incorrectly can make data send and receive impossible. 1. Turn off the Digital Piano and then start up your computer. • Do not start up the music software on your computer yet! 2. After starting up your computer, use a commercially available USB cable to connect it to the Digital Piano. Digital Piano USB port USB cable (A-B type) A connector Computer USB port B connector 3. Turn on the Digital Piano. • If this is the first time you are connecting the Digital Piano to your computer, the driver software required to send and receive data will be installed on your computer automatically. 4. Start up your computer’s music software. 5. Configure the music software settings to select one of the following as the MIDI device. CASIO USB-MIDI : (For Windows Vista, Mac OS X) USB Audio Device: (For Windows XP) • For information about how to select the MIDI device, see the user documentation that comes with the music software you are using. IMPORTANT! • Be sure to turn on the Digital Piano first before starting up your computer’s music software. NOTE • Once you are able to connect successfully, there is no problem with leaving the USB cable connected when you turn off your computer and/or Digital Piano. • For detailed specifications and connections that apply to MIDI data send and receive by this Digital Piano, see the latest support information provided by the website at the following URL. E-24 Connecting to a Computer Connecting to a Computer Using MIDI What is MIDI? The letters MIDI stand for Musical Instrument Digital Interface, which is the name of a worldwide standard for digital signals and connectors that makes it possible to exchange musical data between musical instruments and computers (machines) produced by different manufacturers. NOTE • For detailed information about MIDI Implementation, visit the CASIO website at: See “Send channel” and “Local control” on page E-23. Transferring Song Data with a Computer Use the procedures in this section to transfer Recorder memory data to a computer for storage, and to load songs to user song memory (Music Library 61). IMPORTANT! • Turning off the Digital Piano while it is exchanging data with a computer can cause data in Digital Piano memory to become corrupted. If this happens, a memory format operation will start the next time you turn on the Digital Piano. Note that it takes about 20 seconds for the format operation to finish, and you will not be able to perform any operation during that time. 1. Perform steps 1 through 3 of the procedure under “Connecting the Digital Piano to Your Computer” on page E-24. 2. Change the digital piano’s USB device mode to storage. English • While holding down the FUNCTION button, press the keyboard key that corresponds to the USB device mode. • After this setting is changed, the GRAND PIANO (MODERN, CLASSIC) and ELEC PIANO button lamps flash, and all other lamps are unlit. • See “USB device mode (USB DEVICE MODE)” on page E-23 for more information. 3. On your computer, perform the required operation to display your computer’s storage devices. If your computer is running this operating system: Do this: Windows XP Double-click “My Computer”. Windows Vista Double-click “Computer”. Mac OS Skip step 3 and double-click “PIANO” on your Mac desktop. • The memory of this digital piano will appear as “PIANO” under “Devices with Removable Storage”. E-25 Connecting to a Computer Connecting to a Computer 4. Double-click “PIANO”. • “PIANO” contains folders named MUSICLIB and RECORDER. Use MUSICLIB to load a song into the piano’s user song memory (Music Library 61), and RECORDER to transfer Recorder memory data to and from your comp...

Descargar ahora

Introduzca dos números de la imagen: