Votos - 3, Puntuación media: 3.3 ( )

Fabricar: Roland Tamaño del archivo: 14.42 mb Nombre del archivo: Idioma del manual:

1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “KEYBOARD/PAD,” and press the [ENTER] button. 3 Use the [VALUE] knob to select “PAD VELO CURVE,” and press the [ENTER] button. 4 Use the [VALUE] knob to select the desired PAD VELOCITY CURVE. The number of the selected setting is shown in the display. Number Type of curve Result 1 1 This is the most typical curve. The force with which you strike the pad will correspond to the volume in the most natural way. 2 2 Compared to curve 1, there will be greater volume change for softer strikes on the pad. 3 3 Pad playing dynamics will produce little change in velocity, making it easier for you to perform at a consistent volume. 4 4 Compared with curve 1, striking the pads more strongly will produce greater change PAD AFTERTOUCH CURVE Here’s how to specify the way in which the pressure you apply to the pads will correspond to the aftertouch data that is produced. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “KEYBOARD/PAD,” and press the [ENTER] button. 3 Use the [VALUE] knob to select “PAD AFTCH CURVE,” and press the [ENTER] button. 4 Use the [VALUE] knob to select the desired PAD AFTERTOUCH CURVE. The number of the selected setting is shown in the display. Number Type of curve Result 1 1 This is the most typical curve. The pressure you apply to the pad will correspond to the aftertouch value in the most natural way. 2 2 Compared to curve 1, there will be more change in the aftertouch value starting with softer pressure on the pad. 3 3 Pressure applied to the pad will produce little change in aftertouch value, making it easier for you to produce consistent aftertouch effects. 4 4 Compared with curve 1, you will need to apply stronger pressure on the pad in order to produce aftertouch. 5 Press the [ENTER] 5 Press the [ENTER] 63 System Settings (EDIT Mode) Clock-related Settings System Settings (EDIT Mode) Clock-related Settings Here’s how to specify whether MIDI CLOCK will be transmitted. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “MIDI CLOCK,” and press the [ENTER] button. 3 Use the [VALUE] knob to select “MIDI CLK ON/OFF, [ENTER] button. ” and press the 4 Use the [VALUE] knob to select “ON” or “OFF.” 5 Press the [ENTER] button to return to Play mode. MIDI CLOCK DEFAULT TEMPO This setting specifies the default MIDI clock value when “MIDI CLOCK ON/OFF” is On. After you turn on the power, this tempo will be output until you move the VALUE controller to which Tempo is assigned. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “MIDI CLOCK,” and button. 3 Use the [VALUE] knob to select “DEFAULT TEMPO,” and press the [ENTER] button. 4 Use the [VALUE] knob to specify the MIDI CLOCK DEFAULT TEMPO value in a range of 20–250. The display will indicate the value you specified. 5 Press the [ENTER] button to MIDI CLOCK OUTPUT PORT This setting specifies the port from which MIDI clock will be output when “MIDI CLOCK ON/OFF” is On. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “MIDI CLOCK,” and press the [ENTER] button. 3 Use the [VALUE] knob to select “CLK OUTPUT PORT,” and press the [ENTER] button. 4 Use the [VALUE] knob to specify the MIDI CLOCK OUTPUT PORT. The display will indicate the port you specified. 5 Press the [ENTER] button to return to Play mode. Number Setting Explanation 1 PORT 1 MIDI CLOCK will be transmitted from “A-PRO 1.” 2 PORT 2 MIDI CLOCK will be transmitted from “A-PRO 2.” 3 1AND2 MIDI CLOCK will be transmitted from “A-PRO 1” and “A-PRO 2.” 64 System Settings (EDIT Mode) USB-related Settings System Settings (EDIT Mode) USB-related Settings Here’s how to turn ADVANCED DRIVER MODE on/off. We recommend that you normally leave this On. If you change this setting, the new setting will take force after you’ve turned the power off, then on again. 1 Simultaneously press the [ACT] button and the [ ] button. 2 Use the [VALUE] knob to select “USB SETTING,” and press the [ENTER] button. 3 Use the [VALUE] knob to select “USB ADV DRIVER,” and press the [ENTER] button. 4 Use the [VALUE] knob to specify the USB MIDI driver type. Setting Explanation OFF Choose this if you want to use the standard MIDI driver provided by your operating system (p. 73). (Standard driver mode) ON This setting uses FPT technology to allow high-speed MIDI communication. Choose this if you’ve installed the driver as described in p. 12 and following. * FPT = Fast Processing Technology of MIDI Transmission This takes full advantage of the USB bandwidth to process MIDI data in an optimal way at all times, depending on the amount of MIDI data to be transmitted. 5 Press the [ENTER] button to return to Play 65 System Settings (EDIT Mode) MIDI-related Settings System Settings (EDIT Mode) MIDI-related Settings This setting specifies whether the MIDI connectors will be used as a ...

Descargar ahora

Introduzca dos números de la imagen: