Votos - 0, Puntuación media: 0
(
)
)
|
Fotos y especificaciones Yamaha CP300 |
Resumen del manual
nThis setting is retained even after you turn off the power to the CP300. If you set the Memory Backup’s Master Setting to Off in the Other Settings menu, the Master Settings will return to the default (initial) values when you turn on the power next time (page 71). 2 NO YES EXIT MASTER PERFORMANCE MASTER EDIT PERFORM.FILE TRANSPOSE SONG SELECT NEW SONG REC STOP PLAY/PAUSE SYNCHRO START SONG VOICE/PERFORMANCE 1 2 3-16 TRACK SONG FILE SONG SETTING MIDI OUT PAN EL LOCK DOWN UP TEMPO A B DC CONTRAST GRAND PIANO 1 GRAND PIANO 2 MONO PIANO E. PIANO 1 E. PIANO 2 E. PIANO 3 CLAVI. VIBES ORGAN 1 ORGAN 2 HARPSI. STRINGS CHOIR/PAD GUITAR BASS XG 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 VO ICE EDIT SPLIT VARIATION REVERB CHORUS SPEAKER M IDI SET T I NG MASTER EQ EDIT CLICK OTHER SETTING DEMO 3 41, 2 5 1 Press the [MASTER EDIT] button to call up the Master Setting display. A B Slider NO YES Zone1 Volume Reference C D 2 Select the desired item by pressing the [MASTER EDIT] button or by using the A [–] [+] buttons. For information about the parameters and their values, refer to “Parameters” on page 54. 3 Use the C [–][+] buttons to select a target item. 4 Use the D [–][+] buttons to change the value. 5 Press the [EXIT] button to exit the Master Setting display and return to normal play. CP300 Owner’s Manual 53 Master Settings—Master Edit Master Settings—Master Edit Slider Settings Bank Select LSB Settings for MIDI Transmission to an External Tone Generator For assigning specific functions to each [ZONE CONTROL] slider. A B C Slider Zone 1 Volume NO D YES Setting targets: Zone 1, Zone 2, Zone 3, Zone 4 Functions/range: Volume, Modulation, Brightness, Harmonic Content, After Touch, Control numbers 001 – 031, 033 – 095, Off Default setting: Volume nIf you select After Touch or control numbers 001 – 031, 033 – 095, the slider affects only connected MIDI instruments and not the CP300 itself. Bank Select MSB Settings for MIDI Transmission to an External Tone Generator You can select specific Voices or programs on a connected MIDI device by specifying a Bank Select MSB value, in combination with the Bank Select LSB and Program Change parameters below. A B C SendBankMsb Zone 1 0 NO D YES Setting targets: Zone 1, Zone 2, Zone 3, Zone 4 Setting range: 0 – 127 Default setting: 0 The three specified MIDI messages—Bank Select MSB, Bank Select LSB and Program Change—will be transmitted in the following conditions: • When turning on the Master mode. • When changing any of the values of Bank Select MSB, Bank Select LSB or Program Change when the Master mode is on. • When selecting a Performance which was saved with the Master mode on. You can select specific Voices or programs on a connected MIDI device by specifying a Bank Select LSB value, in combination with the Bank Select MSB parameter (above) and the Program Change parameter (below). A B C SendBankLsb Zone 1 0 NO D YES Setting targets: Zone 1, Zone 2, Zone 3, Zone 4 Setting range: 0 – 127 Default setting: 0 The three specified MIDI messages—Bank Select MSB, Bank Select LSB and Program Change—will be transmitted in the following conditions: • When turning on the Master mode. • When changing any of the values of Bank Select MSB, Bank Select LSB or Program Change when the Master mode is on. • When selecting a Performance which was saved with the Master mode on. Program Change Number Settings for MIDI Transmission to an External Tone Generator You can select specific Voices or programs on a connected MIDI device by specifying a Program Change number, in combination with the Bank Select MSB and Bank Select LSB parameters above. A B C SendPG# Zone 1 1 NO D YES Setting targets: Zone 1, Zone 2, Zone 3, Zone 4 Setting range: 1 – 128 Default setting: 1 The three specified MIDI messages—Bank Select MSB, Bank Select LSB and Program Change—will be transmitted in the following conditions: • When turning on the Master mode. • When changing any of the values of Bank Select MSB, Bank Select LSB or Program Change when the Master mode is on. • When selecting a Performance which was saved with the Master mode on. Reference 54 CP300 Owner’s Manual Octave Setting for Connected External Tone Generator Octave Setting for Connected External Tone Generator or down over a maximum range of two octaves. A B C Octave Zone 1 0 NO D YES Setting targets: Zone 1, Zone 2, Zone 3, Zone 4 Setting range: -2 – 0 – +2 -2 (two octaves lower), 0 (no pitch shift), +2 (two octaves higher) Default setting: 0 The Octave setting is effective when the [MASTER] button is on. It also affects the following settings: Internal: [VOICE EDIT] Octave setting for each Voice MIDI Output: [MASTER EDIT] Octave setting for each zone When the [MASTER] button is off, Octave affects the following: Internal and MIDI Output: [VOICE EDIT] Octave setting for each Voice Internal Tone Generator On/Off Status Turns the sound from the internal tone generator on or off for each part. A B C InternalTG Zone 1 On NO D YES Setting targets: Zone 1, Zone 2, Zo...