Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Procedure 1. Hold down the [REC] button in step 2 in the “Recording to [TRACK2]” on page 39 and use the B [–]/[+] buttons to select a recording track (3–16). C A D B NO YES select a recording track (3-16) 2. While holding down the [REC] key, press the [EXTRA TRACKS] button. Then, follow the procedure beginning with Step 4 on page 36. Other recording techniques Adding data to or recording over an existing song The previous section explains how to record your performance from the beginning by selecting a blank “P 000: NewSong.” You can also add your performance to or overwrite existing songs (such as 50 preset piano songs [P-001—P-050], or your old recorded performances [see page 43]). Procedure To continue recording, follow the procedure described in “Recording a New Song” from page 35 to 40. 1. Select a song for recording (P-001 – P-050). Select one of the preset songs (P-001–P-050) instead of “P-000: NewSong” as described in Step 1 of “Recording to [TRACK1]” on page 35. To select a song from already-recorded data, see Steps 1 and 2 on page 48. NOTE If you record on a track that already has data, the existing data on the track will be lost. 40 PF-500 Changing a voice or tempo after recording You can change the voice and tempo after recording to change a song’s feel or to set a more suitable tempo. You can also change these elements in the middle of a song. Procedure 1. Select a song you wish to change by using the SONG SELECT [ ] [ ] buttons. 2. To change the voice or tempo in the middle of the song, specify the measure to change using the B [–]/ [+] buttons. 3. Change the settings (voice, reverb, etc.). For example, if you wish to change the recorded E.Piano1 voice to E. Piano2, use the voice group buttons and the A [–]/[+] buttons to select E.Piano2. When the setting is complete, press one of the SONG SELECT [ ] [ ] buttons once to return to the song select screen. 4. Press and hold down the [REC] button and select the track to change. The indicator for the selected track lights up in red. Change the tempo setting now, if necessary. At this point, do not play the keyboard or press the SONG [START/ STOP] button. Otherwise, recording will start, erasing the recorded data. 5. Press the [TOP] or [REC] button to exit record mode. NOTE When the starting method is set to “KeyOn,” you cannot change a voice or tempo (page 38) after the recording is complete. TIP Refer to “Questions about Operations and Functions” on page 90 for information on the settings that can be changed here. TIP Change the tempo in Step 4. CAUTION The edited settings (except for the tempo setting) will be saved in memory and you will not be able to restore the previous settings. Proceed with caution. PF-500 41 Adjusting the volume balance between playback and your performance [SONG BALANCE] While recording multiple parts into tracks one by one, you can adjust the volume balance between the playback of the recorded parts and your current performance. Procedure 1. Move [SONG BALANCE] to the left or right to make TIP The song balance setting is adjustments. also used during playback. (See page 48.) SONG BALANCE SONG KEYBOARD The song playback volume will be lower. Your playing volume will be lower. Recording in Dual or Split mode When you record in Dual or Split mode, the PF-500 records each voice onto a separate track. The following table shows how tracks are assigned to each voice. CAUTION When you record multiple parts into tracks one by one, or when you record new data over an existing song (see page 40), the existing data will be erased. Proceed with caution. In the following example, Tracks 1, 2, and EXTRA TRACKn have been selected for recording. Tracks assigned for recording Dual Split Split+Dual TRACK1 TRACK2 EXTRA TRACKn TRACK1 TRACK2 EXTRA TRACKn TRACK1 TRACK2 EXTRA TRACKn vvv vvv vvv Tracks used for MAIN (voice 1) TRACK1 TRACK2 TRACKn TRACK1 TRACKn TRACK1 TRACKn LEFT (voice 1) – TRACK2 TRACKn+1 TRACK2 TRACKn +1 recording MAIN (voice 2) TRACK3 TRACK4 TRACKn +2 – TRACK3 TRACKn +2 LEFT (voice 2) – – TRACK4 TRACKn +3 Note: TRACKn = TRACK 3 – TRACK 16 If “n+1,” “n+2,” and “n+3” exceed 16, TRACKs 1, 2, and 3 are used. TIP Switching between Dual and Split mode in a song is not recorded. 42 PF-500 PF-500 43 Saving Recorded Songs and Handling the Files...[FILE] File A file contains a group of data. On the PF-500, a song file includes song data and a song number. Memory Memory is a location inside the PF-500 in which you can save and edit data. Character code Type of characters File screens (accessed via the [FILE] button) enables you to handle song files (e.g., save, delete, and rename recorded songs), and change the characters on the screen. The following parameters are provided for these operations: PF-500 memory The PF-500 has the following three types of memory: • Current memory: This is a temporary memory area where you can temporarily place and edit the currently-selected song before playback or recording. • Preset song memory: This rea...