Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
In this small leaflet we’ll provide a few extra layering and sequencing tips and techniques that should help you to make full use of the EX synthesizers’ advanced capabilities while avoiding timing problems which can occur if you attempt to push the technology beyond its limits. Layered and Split Setups Here are a few examples of layered and split setups that you might like to use as a starting point when creating your own. The procedure for creating each setup is oulined briefly below. Refer to the EX owner’s manual for full details about the functions and parameters used. n Layered Piano & Pad This is a fairly common layered combination in which a pad voice adds depth and richness to a basic piano sound. 1: Go to the Performance Job mode and execute the Init Perf function (manual page 173). 2: Engage the Performance Edit mode, press [F3] to go to the “MLT” (Multi) display, and assign the “P1-001 Natural Grnd” piano voice to Part 1 (manual page 171). 3: Assign the “P2-002 Warmer” pad voice to Part 2. 4: Scroll down to the Part 2 “Layer Sw” parameter and turn it “On”. Lyr Part 1 Part 2 Part3 Bank P1 P2 P1 Number 001 001 001 Volume P a n 100 cnt 100 cnt 100 cnt 100 cnt Rev Send 40 40 40 40 Cho Send 0 0 0 0 InsEF Sw Out Sel Detune +0 off L&R +0 off L&R +0 off L&R +0 MonoPoly poly poly poly poly KeyAsign MDPanVol mlti off mlti off mlti off Layer Sw on on on Nt Lmt L C-2 C-2 C-2 Nt Lmt H VelLmt L VelLmt H G8 1 127 G8 1 127 G8 1 127 NoteShft +0 +0 +0 Vel Sens n Split Strings & Solo In this split setup a strings voice is played on the left- hand section of the keyboard while a solo voice is played on the right-hand section. 1: Go to the Performance Job mode and execute the Init Perf function (manual page 173). 2: Engage the Performance Edit mode, press [F3] to go to the “MLT” (Multi) display, and assign the “P1-097 Swell String” voice to Part 1 (manual page 171). 3: Assign the “P2-093 TriLead” solo voice to Part 2. 4: Scroll down to the Part 2 “Layer Sw” parameter and turn it “On”. 5: Scroll down to the “Nt Lmt H” parameter and set the Part 1 high note limit value to “B2”. 6: Set the Part 2 “Nt Lmt L” parameter to “C3”. 7: Scroll down to the “NoteShft” parameter and set the Part 1 note shift value to “+12”. With these setting all keys to the left of C3 should play the string voice while all keys to the right of (and including) C3 should play the solo voice. PART 1 C1 C2 C3 C4B2 C5 C6 PART 2 1 Layers & Voice Response Layers & Voice Response Velocity Switching This setup will produce a piano or brass sound depending on how hard you play on the keyboard. 1: Go to the Performance Job mode and execute the Init Perf function (manual page 173). 2: Engage the Performance Edit mode, press [F3] to go to the “MLT” (Multi) display, and assign the “P1-001 Natural Grnd” piano voice to Part 1 (manual page 171). 3: Assign the “P1-065 Sect” brass voice to Part 2. 4: Scroll down to the Part 2 “Layer Sw” parameter and turn it “On”. 5: Scroll down to the “VelLmt L” parame...
Otros modelos de este manual:Sintetizadores / piano - EX7 (84.46 kb)
Instrumentos Musicales - EX5R (84.46 kb)