Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
nTo switch back to the full Voice Name/Number/Category list, right-click on any part of the voice list and choose “Details.” 7 Viewing Just the Voice Names (Windows) You can view just the names of all voices in the group without their “Number” and “Category” information. To do this, right-click on any part of the voice list and choose “List.” This may be useful when choosing voices quickly, since you will have less scrolling to do. nTo switch back to the full Voice Name/Number/Category list, right-click on any part of the voice list and choose “Details.” 7 The Toolbar 12345678 1“Open” button Click this to open the “Open File” dialog and select a Library file to open. “Open File” Dialog nIf you are using a Macintosh, the typical Macintosh “Open” dialog will appear. 1“Look in:” ................. Click this and choose the folder containing the Voice Editor files. 2List box ..................... Shows the contents of the current folder. 3[Open] button ........... Click this to open the file selected from the List. 4[Cancel] button......... Click this to cancel the operation. 5“File name:” ........... Shows the name of the files selected from the List. 6“Files of type:” ......... Click this and choose the file type. 123456 8 2 2 Click this to save the existing Library file with your new settings. If you are working on a new file, this button will open the “Save As” dialog, where you can name and save your settings as a new Library file (*.S3V). “Save As…” Dialog nLibrary file names can consist of up to 8 characters plus a 3-character extension. nIf you are using a Macintosh, the typical Macintosh “Save As” dialog will appear. 1“Save in:”.................. Click this and choose the folder in which to save the Library file. 2List box ..................... Shows the contents of the folder you wish to save to. 3[Save] button ............ Click this to save the Library file with the name specified in the “File name:”. 4“File name:”.............. Specify the name of the Library file to be saved here. 5“Files of type:” ......... Click this and choose the file type. 12453 9 3 3 Click this to open the “Editor Setup” dialog and specify the MIDI Out port settings. “Editor Setup” Dialog This is where you set up the Voice Editor to allow the transmission of voice data to your S03 synthesizer. Click the [OK] button to apply the settings and quit the dialog. Click the [Cancel] button to quit without applying the settings. 1“MIDI Out Port:” ....... Click this and choose the MIDI Out port. You can use the Voice Editor to control and edit the device connected to this port. Select the port which has been assigned to your S03 synthesizer within XGworks(lite). nIf you are using a Macintosh, the MIDI Out Port setting is assigned in the OMS Port Setup. For further details, see section “OMS Settings.” (Page 23) 2“MIDI Ch:”................. Click this and choose the MIDI Out channel. This is used when monitoring sounds using the on-screen keyboard in the Edit Windows. 3“Device No.:” ............ Click this and choose the MIDI device number of your S03 synthesizer. 4“Dump Interval:” ...... Click this and choose the interval between successive MIDI dumps. nIf you set too short an interval, you may encounter errors when transmitting MIDI data. 1234 10 4 4 Click this to open the “Transmit” dialog to transmit all settings to your S03 synthesizer. “Transmit” Dialog Voice data can be transmitted in bulk to your S03 synthesizer. Click the [Start] button to begin transmitting the data. The progress bar shows how much of the data has been transmitted. Finally, click the [Close] button to quit the dialog. 1“Transmit Type”........ Shows the voice data (Normal/Drum/All) to be transmitted. 2Progress bar ............. Shows how much of the data has been transmitted. 3[Start] button ............ Click this to transmit the data. 4[Close] button........... Click this to close this dialog. nThe MIDI Device Number has to be set correctly in order to transmit bulk data. For further details, see page 10. 1234 11 5“Receive” button 5“Receive” button “Receive” Dialog Voice data can be received in bulk from your S03 synthesizer. Select the bulk voice data you wish to receive, then click the [Start] button. The progress bar shows how much of the data has been received. Finally, click the [Close] button to quit the dialog. 1“Receive Type” ......... Click this and choose the Voice data (User Normal/User Drum/ Preset Normal/Preset Drum) to receive. 2Progress bar ............. Shows how much of the data has been received. 3[Start] button ............ Click this to receive the data. 4[Close] button........... Click this to close this dialog. nThe MIDI Device Number has to be set correctly in order to receive bulk data. For further details, see page 10. 1234 6 “Edit Window” button Click this to open the Edit Window (Common) for the selected voice in the list. For further details, see page 14. 7 “Monitor” button If you click this, bulk voice data will be sent for monito...