Iniciar sesión:
Votos - 3, Puntuación media: 3.7 ( )

Manual de usuario Casio, modelo CELVIANO AP45ES1C

Fabricar: Casio
Tamaño del archivo: 1.24 mb
Nombre del archivo: ap_45_e.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


430A-E-038A Assembly Instructions Figure 4 546FCFGIIABGI(Back) 2. Attach back panel C to the 4 brackets and crosspiece D. Note that the back panel C should be installed so it is in front of the 4 brackets (Figure 4). Use the two I screws, six F screws to secure the back panel in place (Figures 3 and 4). Note that you must also install the G clip at this time as shown in the illustration. • First, install the topmost I screws on the left and right sides of the back panel C. Note that you should slip the G clip onto the F screw at point 5 before you screw in the F screw. • The back panel C should rest on the feet of side uprights A and B as indicated by 6 in the illustration. Press the back panel C against crosspiece D while installing the I screws. Figure 5 7 3.Rotate height adjustment screw 7 until it supports crosspiece D, preventing the crosspiece from bending when you press the pedals (Figure 5). Important! • Be sure to rotate adjustment screw 7 and perform the adjustment procedure described above before depressing the pedals. Failure to do so can result in damage to crosspiece D. 430A-E-039A 2 Installing the Keyboard onto the Stand CAUTION Take care that you do not pinch your fingers between the keyboard and stand! Figure 6 8HH8 Be sure that you securely anchor the keyboard to the stand using the H butterfly bolts (Figure 6). • Slide the screws on the bottom of the keyboard into the slots in the two angle brackets 8. Next, secure the keyboard to the stand with two butterfly bolts H (Figure 7). Figure 7 Front Back H8 • The butterfly bolts keep the keyboard from falling from the stand. Be sure that you always secure the keyboard with the butterfly bolts. Assembly Instructions 4 Connecting to a Power Supply 1. Check to make sure that the digital piano’s POWER button is in the OFF position. If it is ON, press the button to switch it OFF. 2. Attach the power cord that comes with the digital piano to the bottom of the digital piano.* 3.Plug the digital piano’s power cord into a wall outlet (Figure 9). * applies to the AP-45V. Important! • The shapes of the digital piano’s power cord and wall outlet should be different according to countries or regions. The illustrations are examples. • With the AP-45, the power cord is hard-wired to the bottom of the instrument. Attachment of the Score Stand Install the music stand by inserting its pegs into the holes in the top of the piano. Figure 9 Power cord Household wall outlet 3 Connecting the Pedal Position the pedal plug as shown in Figure 8 and insert it into the pedal connector on the bottom of the digital piano. Secure the pedal cable to the upright of the stand using the clips (Figure 8). Figure 8 Clip Pedal plug CAUTION • The screws that you use to assemble the stand may become loose after a long period due to changes in temperature and humidity, or vibration caused by normal use, etc. Periodically check the screws used to fasten the stand and the butterfly bolts used to fasten the stand and the digital piano, and tighten them whenever necessary. Power Outlet • To power the digital piano, use a power outlet that allows easy access when plugging in or unplugging the power cord. 430A-E-040A Specifications All of the items in these specifications apply to the AP-45 and AP-45V, unless specifically noted otherwise. Models: AP-45/AP-45V Keyboard: 88 piano keys (with touch response) Polyphony: 64 notes, maximum Tones: • 16 • Layer: Adjustable volume • Split: Split point, adjustable volume Digital Effects: Reverb (8 types), Chorus (8 types), Brilliance Demo Tunes: • Number of Tunes: 16 • Playback: Repeat (all tunes, one tune) Song Memory: • Operations: Real-time recording, playback • Number of Tracks: 2 (Track A, Track B) • Capacity: Approximately 8,000 notes (total of 2 tracks) • Memory Backup: Built-in lithium battery (Battery Life: Approximately 5 years) Music Library: • Number of Tunes: 50 • Playback: All song repeat, specific song • Part Off: L, R Pedals: Damper, Soft, Sostenuto Other Functions: • Metronome: Beat (6 types), Tempo ( = 30 to 255) • Touch Select: 3 types, off • Transpose: 1 octave (F to C to F) • Tuning: A4 = 440.0Hz ±50 cents (adjustable) • Temperament: 7 types • Baroque pitch MIDI: 16 multi-timbre receive Input/Output: • Headphones: Stereo standard jacks . 2 • LINE OUT (R, L / MONO): Standard jacks . 2 Output Impedance ; 1.1K. Output Voltage ; 1.3V (RMS) MAX • MIDI (OUT) (IN) Speakers: 16cm . 2, 5cm . 2 (Output: 20 W + 20 W) Power Supply: AP-45: 120V AP-45V: 220-240V Power Consumption: AP-45: 60W AP-45V: 60W Dimensions: • Digital Piano (without stand): 136.9 . 43.9 . 23.0 cm (53 15/16 .17 5/16 . 9 1/16 inch) • Digital Piano: 137.9 . 44.8 . 83.8 cm (54 5/16 . 17 10/16 . 33 inch) Weight: • Digital Piano (without stand): approximately 34.0 kg (75.0 lbs) • Digital Piano: approximately 46.0 kg (101.4 lbs) • Design and specifications are subject to change without notice. • AP-45 has hardwired power cords. • AP-45V has detachable power cords. 430A-E-041A...

Otros modelos de este manual:
Instrumentos Musicales - AP-45 (1.24 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría