Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
With the passcode properly set, press [ ] to select “MAdr1.” Press [ ] and [ ] to move the cursor left and right. Note: You can also use the dial on the control unit to enter the address. Enter the address with [+/YES] and [–/NO]. You can set up to three addresses. Press [ENTER] to complete the operation. 4 >Passcode=1234 >MAdr1=##:##:##:##:##:## =Passcode= -+ 5 1 >Passcode=1234 >MAdr1=##:##:##:##:##:## =Passcode= -+ 2 3 >Passcode=1234 >MAdr1=01:AB:23:C#:##:## =Passcode= -+ 4 11 Other Settings Chapter 116 You can adjust the brightness of the display. You can also set the display to dim after the elapse of a certain time if there is no operation. Press [SYSTEM] on the remote control. The system menu screen appears. Select “Display” with the cursor buttons ([ ] [ ] [ ] [ ]), then press [ENTER]. The display setting screen appears. Press [+/YES] and [–/NO] to change the brightness. The following brightness settings are available: 40%, 60%, 80%, 100%. Adjusting the Brightness of the Display [SETUP] “Display” 1 *Clock Adj. *Backup *TimeZone *Restore =STSTEM MENU= (1/2) 2 *Language *Display *Maintenance =STSTEM MENU= (2/2) *Brightness=100% *Dim light=OFF =Display= -+ENT 3 *Brightness=80% *Dim light=OFF =Display= -+ENT Other Settings English 11 Chapter 117 Note: The brightness of the display will return to its original setting when you press any buttons, insert media, or eject media. To set the time for the display to dim, press [ ] to move the cursor to the dim light parameter, then press [+/YES] and [–/NO]. The following time settings are available: OFF, 1min, 2min, 3min, 5min, 10min, 15min, 30min, 45min, 60min. If there is no operation for the time set above, the display dims to half the brightness of its original setting. Press [ENTER] to complete the operation. Press [SYSTEM] on the remote control. The system menu screen appears. Select “Language” with the cursor buttons ([ ] [ ] [ ] [ ]), then press [ENTER]. The language setting screen appears. 4 *Brightness=100% *Dim light=1min. =Display= -+ENT 5 Switching the Languages for the Screen [SYSTEM] “Language” 1 .. .. .. .. !"#$%.. 2 *Language *Maintenance =SYSTEM MENU= .(2/2) *Display .. .. 11 Other Settings Chapter 118 Press [+/YES] and [–/NO] to select the language. Press [ENTER]. “OK?” flashes in the first line of the screen. Press [+/YES] to set the language, and return to the system menu screen. Important: If you reset your Disklavier, depending upon the option you select, you may lose all parameters or all data in the internal memory, or both of these. For normal use, you do not have to reset. If you must reset your Disklavier, Yamaha strongly recommends that you backup your songs in the internal memory. However, you cannot backup your various parameter settings. If you want to return your Disklavier to its initial factory settings, follow the procedure below. Press [SETUP] on the remote control. The se...
Otros modelos de este manual:Sintetizadores / piano - DS6E3PRO PE (3.83 mb)
Sintetizadores / piano - DA1E3 PE (3.83 mb)
Sintetizadores / piano - DC1E3 (3.83 mb)
Sintetizadores / piano - DC1XE3S (3.83 mb)