Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
• When you turn on SPLIT, the last selected settings appear. USING LAYER The MD-1200 lets you set the keyboard to play two different preset tones at the same time, creating a “layered effect” when you press one key. Note: The first tone you select when using LAYER is called the base tone and the second tone is called the layer tone. 1. Press TONE. 2. Enter the three-digit number for the base tone. 3. Press LAYER. The LAYER indicator appears. 4. Enter the three-digit number for the layer tone. 5. Play the keyboard to hear the selected layered tones. To select a different layer tone, enter the three-digit number for the new layer tone while the LAYER indicator is on the display. To select a different base tone, press LAYER to turn off its indicator, then enter the three-digit number for the new base tone. Then press LAYER again so the LAYER indicator appears. To cancel LAYER, press LAYER again so its indicator turns off. Notes: • If LAYER is on when you turn off the keyboard, LAYER will still be on the next time you turn on the keyboard. • When you turn on LAYER, the previous tone settings appear. USING SPLIT AND LAYER TOGETHER You can combine the SPLIT and LAYER features, so you can play one layered combination of tones on the low-end keys and another on the high-end keys. 14 42-4041.fm Page 15 Tuesday, August 3, 1999 6:56 AM 1. If the SPLIT or LAYER indicator is on, press SPLIT or LAYER to turn it off. 2. Enter the number for the high-end base tone on the keypad. 3. Press SPLIT so the SPLIT indicator appears. 4. Enter the number for the low-end base tone. 5. Press SPLIT so the SPLIT indicator disappears. 6. Press LAYER so the LAYER indicator appears. 7. Enter the number of the layered tone for the high-end keys. 8. Press SPLIT. The SPLIT indicator appears. 9. Enter the number of the layered tone for the low-end keys. 10. If desired, hold down SPLIT and press the key where you want the high-end tones to begin. 11. Play the keyboard to hear the selected tones. To cancel the SPLIT/LAYER combination, press each button so both the SPLIT and LAYER indicators disappear. USING THE PRESET AUTO-RHYTHMS Your MD-1200 has 100 preset auto- rhythms that provide a steady beat for your music. The name and two-digit number of each preset auto-rhythm is marked to the left of the MD-1200’s display. You can play a preset auto-rhythm on the MD-1200 in any of these ways: • Select and play a rhythm. See “Selecting/Playing an Auto- Rhythm.” • Synchronize the start of a rhythm with your music. See “Using SYNCHRO” on Page 16. • Start a rhythm with a special introduction. See “Using INTRO” on Page 17. • Stop a rhythm with a special ending. See “Using ENDING” on Page 17. • Briefly vary the pattern of a rhythm. See “Using FILL-IN” on Page 17. • Play an alternate version (variation) of a rhythm. See “Using VARIATION” on Page 17. Selecting/Playing an Auto-Rhythm 1. Press RHYTHM. RHYTHM and the name and number of the current auto-rhythm appear on the display. Note: The MD-1200 automatically selects the rhythm CLUB POP (No. 00) the first time you turn it on. Each time you turn it on after that, it recalls the last selected rhythm. 15 42-4041.fm Page 16 Tuesday, August 3, 1999 6:56 AM NORMAL/FILL-IN TEMPO INTRO 2. To select a different rhythm, choose an auto-rhythm from the 100 RHYTHMS list and enter its two- digit number on the keypad. For example, to select 8 BEAT BALLAD 2 (No. 05), press 0 then 5. Note: You can select the next highest or lowest numbered auto-rhythm by simply pressing + or – on the keypad. 3. Set MODE to NORMAL. Then press START/STOP to start the selected auto-rhythm. 4. Adjust the volume to the desired level. 5. To change the auto-rhythm speed, press TEMPO or . The current tempo setting appears on the display. Notes: • You can adjust the tempo to play an auto-rhythm from 40 to 255 beats per minute. • To quickly slow down or speed up the tempo, hold down TEMPO or . SYNCHRO/ENDING VARIATION/FILL-IN • You can also adjust the tempo by first pressing TEMPO or , then entering the desired number of beats per minute in three digits (040 to 255), or by holding down + or – on the keypad. • To reset the tempo to its default (original) speed, press TEMPO or at the same time. To select a different rhythm, repeat Steps 1 and 2. To stop the auto-rhythm, press START/ STOP. Using SYNCHRO The MD-1200’s SYNCHRO feature lets you synchronize the start of an auto- rhythm with the beginning of your music. After you select and enter an auto- rhythm, press SYNCHRO/ENDING, then begin playing the keyboard. The rhythm automatically starts to play when you press any key within the first 11/2 octaves of the lower end of the keyboard (the first 18 keys from the left). 16 42-4041.fm Page 17 Tuesday, August 3, 1999 6:56 AM Using INTRO The MD-1200’s INTRO feature lets you start the selected auto-rhythm with a light, 3- to 8-measure introduction that blends easily into the selected rhythm. To start a rhythm with an introduction, select and enter the rhythm...