Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
. Transferring MIDI data to and from a computer MIDI OUT IN POWER MIDI IN connector MIDI OUT connector MIDI IN connector MIDI OUT connector Optional MIDI cables MIDI instrument POWER IN OUT MIDI IN connector MIDI OUT Computer connector UX16 (optional) USB port 26 Connecting the Digital Piano to a Computer YDP-160/140 Owner’s Manual 29 Connecting the Digital Piano to a Computer Connecting the digital piano to a computer using the MIDI connectors enables you to transfer MIDI data between the piano and the computer. This connection requires that you have appropriate application software installed on the computer. Also, installing Musicsoft Downloader on the computer enables you to transfer song data between the piano and the computer. (page 32) When this instrument is used as a tone module, performance data with voices that are not found on this instrument will not be played correctly. Before you connect this instrument to a computer, first turn off the power to both this instrument and the computer. After you make the connections, turn on the power to the computer first, then turn on the power to this instrument. An example of connecting this instrument to the USB port on a computer Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this instrument’s MIDI connectors to the computer’s USB port. You must install the USB-MIDI driver on the computer correctly so that you can control your MIDI instrument from the computer. The USB-MIDI driver is a software application that enables MIDI signals to be transmitted between the sequence software on the computer and the connected MIDI instrument. For more information, refer to the user’s manual that came with the USB interface device. Connecting this instrument to the computer using a USB-MIDI interface Turn off the power to this instrument. Connect the MIDI OUT cable from the USB-MIDI interface to this instrument’s MIDI IN connector, and connect the MIDI IN cable from the USB-MIDI interface to this instrument’s MIDI OUT connector. The connection between this instrument and the computer has now been established. Turn on the power to this instrument and try to transfer MIDI data to or from the computer. For more information on connecting the UX16, refer to the user’s manual that came with the UX16. You must install a software application on the computer to be able to transfer MIDI data between this instrument and a computer. IN OUT POWER MIDI OUT IN Computer 27 MIDI Functions MIDI Functions You can make detailed adjustments to MIDI settings. MIDI Transmit/Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data. Procedure Setting the transmit channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C1–E2 keys. Setting the receive channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C4–F5 keys. C1 C4 F5 E2 OFF D 2 E5 135 68 10 24 7 9 11 14 16 12 13 15 ALL 135 6 8 10 24 7 9 11 14 16 12 13 151+2 (C1–D 2) (C4–F5) For setting the transmit channels. For setting the receive channels. Local Control ON/OFF “Local Control” refers to the fact that, normally, the keyboard of this digital piano controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the keyboard of this digital piano does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. Procedure While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and Off. In Dual mode, Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this mode, no data is transmitted if the transmit channel is set to “OFF.” MIDI receive channel is ALL: A “Multi-timbre” Receive mode is available. In this mode, this instrument receives different parts from the connected MIDI device on any or all 16 MIDI channels and plays multi-channel song data. MIDI receive channel is 1+2: A “1+2” Receive mode is available. It allows simultaneous reception on channels 1 and 2 only, enabling this instrument to play 1 and 2 channel song data received from a music computer or sequencer. Program change and other like channel messages received will not affect this instrument’s panel settings or the notes you play on the keyboard. Data...
Otros modelos de este manual:Sintetizadores / piano - Arius YDP-160 (854.42 kb)