Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Sistemas de refrigeración - G-Power (230.85 kb)
Sistemas de refrigeración - G-Power (178.24 kb)
Resumen del manual
Then the installation is completed . (Figure 4-2). - 7 GH-PDU21-MF English Power Installation and PCI Fan Speed Figure 1-1 Figure 1-2 Figure 2-1 Figure 3-1 Figure 1 Disassemble the turn knob, bolt and fan speed controller from the 3.5” bracket and reassemble these parts onto a PCI bracket in sequence. Figure 2 Place the PCI bracket with the fan speed controller in the selected PCI slot. Use screws to secure the PCI bracket in place. Figure 3 Repeat the steps in “Power Installation and 3.5” Fan Speed Controller Installation (Figure 2-1~Figure 4-2)”. The installation is now completed. - 8 GH-PDU21-MF Installation Instructions for P4 LGA775RM English Side A Side B ARM CAM Figure 1 Plastic Washers Figure 2 Figure3- 1 Figure3-2 To install GH-PDU21-MF on LGA775 motherboard needs both LGA775 RM & P4 clips. Please add an adequate layer of heat sink paste on the surface of the CPU. Figure 1 Place the LGA775RM onto the LGA775 motherboard so that side A is parallel with ARM and side B is parallel with CAM. Figure 2 From the underside of the motherboard, use screws (4) and plastic washers (4) together to secure the LGA775RM into place.. Figure 3 Gently push down on the cooler unit to lock it into position. (Figure3-1). Repeat the steps in “Power Installation and 3.5” Fan Speed Controller Installation (Figure 2-1~Figure 4-2)”. The installation is now completed. GH-PDU21-MF provides manual fan speed control function. The fourth pin of the 4-pin CPU fan header does not necessarily have to be connected (Figure 3-2) . Note: About P4 Clips installation, please refer to “Installation Instructions for Intel ® Pentium ® 4 mPGA478 Clips” - 9 GH-PDU21-MF English Installation Instructions for Intel ® Pentium ® 4 mPGA478 Clips Figure 1-1 Figure 1-2 AB C Figure 2 Figure 3-1 Figure 3-2 Figure 4 Figure 1 Please add an adequate layer of heat sink paste on the surface of the CPU(Figure1-1). Figure 1-2 showing the correct installation of the cooler atop the CPU. Figure 2 Clip introduction-Part A: Secured to the retention mechanism hook. Part B: Tightly contact the cooler bracket. Part C: Secured to the retention mechanism hook. Figure 3 Secure Parts A, B, and then C of the clip to the retention mechanism. Assure that Part C is secured to the retention mechanism hook on the same side as the heat pipes. Figure 4 Repeat the steps in “Power Installation and 3.5” Fan Speed Controller Installation (Figure 2-1~Figure 4-2)” . The installation is now completed. - 10 GH-PDU21-MF Installation Instructions for AMD AM2 (English Figure 1-1 Figure 1-2 Figure 2 Figure 3 Figure 4-1 Figure 4-2 Figure 1 Please add an adequate layer of heat sink paste on the surface of the CPU. Figure 2 Figure showing the correct installation of the cooler atop the CPU. Figure 3 Align the three insert spaces of the clip with the three juts on the CPU socket and then push firmly downwards to hold the clip in space. If AM2, only need to hook up the middle of protuberant point. Figure 4 Push the lever on the side of the cooler towards the lever position on the base of the CPU to secure the cooler atop the CPU. Repeat the steps in “Power Installation and 3.5” Fan Speed Controller Installation (Figure 2-1~Figure 4-2)”. The installation is now completed. - 11 GH-PDU21-MF English English - 12 GH-PDU21-MF Intel ® Pentium ® 4 LGA775 / mPGA478 AMD AM2(940) /K8 (939 / 754) GH-PDU21-MF ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... ....................................................................18 3.5 ...................................................19 PCI ................................................................20 P4 LGA775 ...............................................................21 Intel ® Pentium ® 4 mPGA478 ........................................................22 AMD AM2(940) / K8 (939 / 754) ...................................................23 - 14 GH-PDU21-MF (1) GH-PDU21-MF (5) (6) (3) P4 (4) AM2 / K8 (7) (2) LGA775 (8) 3.5 (10)PCI (9) (11) GH-PDU21-MF (12) ( 1) - 15 GH-PDU21-MF • : 110 x 110 x 109 mm • : 4 • : 1,700 ~ 3,200 rpm • : 12V • : 21.3 ~40.1 dBA • : Ball Bearing • : • : Aluminum • P4 LGA775 • : 0.1~ 0.5 • : 36.2 ~ 68.5 CFM • : 50,000 hr • : 430g • : Intel ® Pentium ® 4 LGA775 840 / 670 / 570(3.8GHz) Intel ® Pentium ® 4 478 3.4GHz AMD AM2 (940) / AMD AthlonTM FX55 / AMD AthlonTM XP 4000+ P4 mPGA478 AMD AM2(940) / K8(939 / 754) • • 4 • (1,700~3,200 rpm) • 3.5 PCI • LED • • • - 16 GH-PDU21-MF BIOS - 17 GH-PDU21-MF 3.5 3 pin CPU fan 4 pin CPU fan (LGA775) - 18 GH-PDU21-MF 3.5 1 3.5 ( 1-2) 1-...