Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
SAVE THESE INSTRUCTIONS 4 FEATURES PRODUCT SPECIFICATIONS Weight ............................................................................................................................................................................4 lbs. Air Velocity: MPH...............................................................................................................................................................................150 CFM ...............................................................................................................................................................................279 Fig. 1 AIR OUTLET AIR INTAKE BLOWER ATTACHMENT SHAFT END CAP BLOWER HOUSING KNOW YOUR BLOWER ATTACHMENT See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 5 ASSEMBLY UNPACKING This product requires assembly. • Carefully remove the items from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. • If any parts are damaged or missing, please call 1-800-242-4672 for assistance. PACKING LIST Expand-it™ Blower Attachment Hanger Cap Operator’s Manual WARNING: If any parts are damaged or missing, do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. JOINING THE POWER HEAD TO THE BLOWER ATTACHMENT See Figure 2. WARNING: Never attach or adjust any attachment while power head is running. Failure to stop the engine may cause serious personal injury. The blower attachment connects to the power head by means of a coupler device. • Loosen the knob on the coupler of the power head shaft and remove the end cap from the attachment shaft. BLOWER ATTACHMENT POWER HEAD SHAFT GUIDE RECESS KNOB POSITIONING HOLE Fig. 2 COUPLER • Push in the button located on the blower attachment. Align the button with the guide recess on the power head coupler and slide the two shafts together. Rotate attachment shaft until button locks into the positioning hole. NOTE: If the button does not release completely in the positioning hole, the shaft is not locked into place. Slightly rotate from side to side until the button is locked into place. • Tighten the knob securely. WARNING: Be certain the knob is fully tightened before operating equipment. Check it periodically for tightness during use to avoid serious injury. REMOVING THE ATTACHMENT FROM THE POWER HEAD For removing or changing the attachment: • Loosen the knob. • Push in the button and twist the shafts to remove and separate ends. 6 7 WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this tool for the purposes listed below: . Clearing leaves and other debris from your lawn . Keeping decks and driveways free from leaves and pine needles USING THE BLOWER ATTACHMENT See Figure 3. When using the blower attachment, hold the unit with your right hand on the rear handle and your left hand on the front handle. Keep a firm grip with both hands while in operation. The blower should be held at a comfortable position with the rear handle about hip height. NOTE: Carry the unit slightly above ground level. Do not drag or push it along on the ground as the housing will wear quickly. OPERATING TIPS . So that you may become accustomed to the blower operation, start the engine and let it warm up. At idle, you will find that no air is moving because the clutch is disengaged. As you gradually increase the engine speed to full throttle, you will find that the air force increases also. OPERATION . The blower produces a strong air blast when operated at full speed and the air force is directly controlled by the engine speed. ... In many situations it is not necessary to use the full power of the blower; in fact it is not advisable in some applications. When using the blower in tight quarters, such as corners of patios and garag...