Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
2) bearing one of the marks indicated in the tables of the allowed fittings (see the following paragraph). 3.1 TABLES OF FITTINGS ALLOWED Table N° 18a let you identify the version of your machine indicating the basic equipment and all the possible fittings available (optional). You can also find the other fittings allowed or other versions to meet your requirements in the future. THE EQUIPMENT DEFINED IN THE TABLES OF THIS HANDBOOK (TAB: 18a, page 31) SHOULD BE CONSIDERED BINDING FOR THE VALIDITY OF THE DECLARATION OF CONFORMITY. Other fittings or setups of basic components and/or optionals should be considered unsafe and therefore are not covered by the guarantee and aren’t UNIGREEN’s responsibility. The same goes for fittings realised with components or accessories that aren’t original UNIGREEN parts. UNIGREEN accessories can easily be identified by the label with the yellow background “ORIGINAL UNIGREEN ACCESSORY” TYPE : ....................................................................... code: ........................................ N. ........................... massa a vuoto: ..........................Kg. max press. : ........... bar net mass massa totale ammessa: .............................. Kg. total mass via Rinaldi, 105 - Reggio Emilia ITALIA ANNO YEAR 20 ....... made in Italy FIG.2 unigreen 7 3.2 NOISE LEVEL OF THE MACHINE Use earmuffs to protect your ears when using the machine, below you will find the data on the maximum noise levels during work. Atomisers with centrifugal fan rotor (Airdrop) ACOUSTIC POWER LEVEL emitted by the machine: 123,8 dBA in 2nd gear ACOUSTIC POWER LEVEL AT THE OPERATOR’S POSITION emitted by the machine: 103,2 dBA in 2nd gear Readings taken in accordance with the following standards: Machines Directive 2006/42/CE Legislative Decree D.Lgs. n°292 of the 4th of September 2002 concerning the environmental acoustic emission of machines and equipment for use outdoors. UNI EN ISO 4254-1; 2006 3.3 STANDARDS OF REFERENCE: - MACHINES DIRECTIVE 2006/42/CE -D.Lsg. 81/08 Unique text for safety and hygiene in working places -UNI EN ISO 12100-1/Apr.2005 : Machinery safety - Fundamental concepts, general design principles - Part 1: basic terminology, methodology -UNI EN ISO 12100-2/Apr.2005 : Machinery safety - Fundamental concepts, general design principles - Part 2: Technical principles -UNI EN ISO 13857: May 2008 : Machinery safety, safe distances to avoid reaching hazardous areas with upper limbs. -UNI EN 349/November 2008: Machinery safety, minimum spaces to prevent crushing of body parts -UNI EN 907/Nov.1998: Agricultural and forestry machinery - Sprayers and spreaders of liquid fertilizers - Safety. -UNI EN ISO 13849-1: February 2007: Machinery safety - Fundamental concepts, general design principles -UNI EN 982/January 2007: Machinery safety. Safety requisites relevant to systems and their components for hydraulic and pneumatic transmissions. Hydraulics. -UNI EN ISO 4254-1/June 2006: Agricultural machines - Safety - Part 1: General requisites -ISO 11684/1995: Pictograms - general principles. 4 INSTRUCTIONS To use the machine the personnel must be suitably trained on the basis of the regulations in force on safety and hygiene at work. THE USE OF THE MACHINE FOR PERSONS UNDER 18 YEARS OF AGE IS STRICTLY FORBIDDEN 4.1 DESCRIPTION OF THE MACHINE The mistblowers consist of a structural steel frame and a polyester tank reinforced with fibreglass or high-density polyethylene. The frame is hot-galvanised. The tank is easy to empty and this makes it possible to use the machine even on hillsides. The pumps are generally diaphragm pumps but in some cases they are fitted with pistons. The accessories for completing the fitting, non-drip jets and ceramic nozzles make the UNIGREEN mistblower a highly qualified and efficient piece of equipment. 4.1.1 WORK STATIONS The use of this machine does not envisage an operator standing constantly near the same, the operator normally sits in the cab of the tractor. During calibration and maintenance operations the operator will be working near the machine at ground level (for all the calibration and maintenance operations refer to the relevant chapters). In case of operations that request the entry to parts of the machines located at 1,5 mt. height ,it is advised to use a ladder at rule; the ladder shall be positioned steady on a flat ground not yielding and with the machine at a standstill and braked. In some special models with controls above 1.5 metres there is a platform to make these operations easier. This platform must only be used with the machine stopped. 8 unigreen 4.1.2 HAND WASHING TANKS The mistblowers are supplied with an auxiliary hand-washing tank with clean water and a hand tap. This tank must always be supplied with water and the inside must be clean so you can wash any parts of the body that come into contact with the chemical product used. Never drink the liquid inside. 4.2 PRELIMINARY CHECKS When you receive the machine, check...
Otros modelos de este manual:Los sistemas de ventilación - Minibar (1.46 mb)
Los sistemas de ventilación - Super Spalliera (1.46 mb)
Los sistemas de ventilación - Ventagli (1.46 mb)