Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
• To remove turbo, reverse the installation steps. Recommended Accessories • Front counterweight is recommended when using rear-mounted grass catcher. • On slopes over 17.6% (10°), use two rear wheel weights in addition to front counterweight. Always mow up and down the face of slopes, never across the face. Never mow on slopes greater than 30% (16.7 degrees) NOTE: In these instructions, “left” and “right” are referred to as seen from the operating position. 1 2 Installation Instructions 54”Turbo Blower 38 1 2 41 3 6 40 5 4 7 8 9 25 52 55 51 50 46 53 48 49 47 45 54 44 58 57 56 60 20 31 37 24 64 65 66 67 68 23 43 42 21 33 34 32 26 35 28 36 29 27 17 12 15 22 11 14 13 18 16 10 30 59 5 1 1 2 1 17 19 20 27 5 3 19 20 20 19 31 4466 39 27 46 61 62 63 54”Turbo Blower Installation Instructions Kit Contents: Kit Contents: Ref Part No. Qty. Description Ref Part No. Qty. Description 1 1665982 4 RETAINER, Bearing 35 1921159 1 CAPSCREW, 1/4-20 x 2-1/4 2 108202 2 BALL BEARING 36 1720978 1 SPACER, 5/8 x 1 3 1931333 5 CARRIAGE BOLT, 5/16-18 x 3/4 37 1704628 2 PIN, Spring 4 1706631 1 FAN ASSY 38 1720892 1 HOUSING, with Decal 1927557 8 FLANGE LOCKNUT, 5/16-18 39 1700259 1 DECAL-Danger 6 1921332 3 CAPSCREW, .312-18X0.750 G5 40 1933988 3 PAL NUT, 5/16 7 1706634 1 PULLEY 41 1672689 1 S-HOOK 8 960403 1 KEY, Woodruff 42 1927429 3 TAPTITE SCREW, 1/4-20 x 5/8 9 1960619 1 SET SCREW, Torx, 5/16-18 x 5/16 43 1706630 1 STRAP 1935255 1 SPEED NUT 44 1960472 6 SCREW, Truss Head, 1/4-20 11 1919438 1 NYLOCK NUT, 5/16-18 45 1921969 1 CAPSCREW, 3/8-16 x 1-1/2 12 1720918 1 COVER 46 1924940 4 WASHER, 3/8 13 1917372 1 NUT, 5/16-18 47 1708029 1 PULLEY, Idler 14 1917356 1 LOCKWASHER, 5/16 48 1916965 2 LOCKWASHER, 3/8 1713588 1 SPACER 49 1916950 2 NUT, 3/8-16 16 1935255 1 PAL NUT, 5/16-18 50 1923701 1 CAPSCREW, 3/8-16 x 2 17 1921959 4 CAPSCREW, 1/4-20 x 5/8 51 1666114 1 BUSHING 18 1700654 1 BRACKET, Belt Cover 52 1720934 1 LEVER ASMY 19 1916964 4 LOCKWASHER, 1/4 53 1922755 1 WASHER, 3/8 1916622 4 NUT, 1/4-20 54 174896 1 SPRING, Extension 21 1721454A 1 COVER, Arbor 55 1704419 1 BELT STOP 22 1921719 1 CAPSCREW, 5/16-18 x 2-1/2 56 1930641 8 LOCKNUT, 1/4-20 23 1927120 1 CAPSCREW, 7/16-14 x 2-1/4 57 1921319 1 WASHER, 1/4 24 1720737 1 PULLEY & HUB ASMY 58 1921961 1 CAPSCREW, 1/4-20 x 1-1/4 1720932 1 V-BELT 59 1930645 1 NUT, 3/8-16 26 1720749 1 SUPPORT PLATE 60 1720721 1 PLATE & BRACKETS ASMY 27 1720921 3 LOCKING TAB 61 1929000 2 TAPTITE SCREW 28 1719590 1 SPRING, Extension 62 1668500 1 BRACKET 29 1720920 1 PLATE, Deflector Mounting 63 1672735 1 SPRING 1931320 1 CARRIAGE BOLT, 1/4-20 x 1-1/4 64 1917372 6 NUT, 5/16-18 31 1720718 2 PILOT PIN, Tapered Spacer 65 1917356 6 LOCKWASHER, 5/16 32 1933896 4 LOCKNUT, 10-24 66 1931333 6 CARRIAGE BOLT, 5/16-18 x 3/4 33 1720951 1 ROD & ANCHOR ASMY, Deflector 67 1721023 1 BAFFLE, RH, 26-1/2” 34 1960404 4 SCREW, Truss Head, 10-24 x 3/4 68 1720613 1 BAFFLE, LH, 23-1/2” 3 Installation Instructions 54”Turbo Blower INITIAL INSTALLATION WARNING Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, and disconnect the spark plug wire(s). NOTE: When installing this attachment on early models, the rivets securing the clips (E, Figure 1) must be drilled out, and the new belt cover secured with taptite screws supplied. NOTE: Th...
Otros modelos de este manual:Los sistemas de ventilación - 1693706 (327.76 kb)
Los sistemas de ventilación - 1695299 (327.76 kb)
Los sistemas de ventilación - 1695299 (327.76 kb)