Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Pre-mix unleaded gasoline and 2-cycle engine lubricant in a clean 1 gallon container approved for gasoline. Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use. NOTE: Do not use alcohol-based fuels (like E85) in this product. OPERATION Mix Homelite Premium Exact Mix lubricant with gasoline according to the instructions on the package. If Premium Exact Mix lubricant is not available, use a high quality synthetic 2-cycle engine lubricant, mixed at 2.6 oz. per gallon (US). Do not use automotive lubricant or 2-cycle outboard lubricant. NOTE: Premium Exact Mix fuel mix will stay fresh up to 30 days. DO NOT mix quantities larger than usable in a 30 day period. PREMIUM EXACT MIX (50:1) GASOLINE LUBRICANT 1 gallon (US) 2.6 oz. 1 liter 20 cc (20 ml) FILLING TANK .Position the product with the fuel cap pointing upward. .Clean surface around fuel cap to prevent contami- nation. .Loosen fuel cap slowly. Rest the cap on a clean sur- face. .Carefully pour fuel into the tank. Avoid spillage. .Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage. NOTE: It is normal for smoke to be emitted from a new engine after first use. WARNING: Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke! ASSEMBLy CAUTION: Make all adjustments to the harness straps before starting the blower to avoid the possibility of injury. AdJUSTING HARNESS STRAPS Harness straps should be adjusted to a comfortable position before starting the blower. To adjust the harness straps: .Blower should be in operating position before adjusting the harness straps. Slip arm through harness strap and onto shoulder, then repeat for the other shoulder. ..Tighten or loosen each harness strap as needed, until they are adjusted to a comfortable operating position. ..Pull on harness straps to secure in buckle. WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. APPLICATIONS You may use this product for the purposes listed below: . Clearing leaves and other debris from your lawn . Keeping decks and driveways free from grass clippings, leaves, pine needles, and other debris FUELING ANd REFUELING FUEL MIXTURE This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded gasoline and 2-cycle engine lubricant in a clean 1 gallon container approved for gasoline. Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use. NOTE: Do not use alcohol-based fuels (like E85) in this product. OPERATION Mix Homelite Premium Exact Mix lubricant with gasoline according to the instructions on the package. If Premium Exact Mix lubricant is not available, use a high quality synthetic 2-cycle engine lubricant, mixed at 2.6 oz. per gallon (US). Do not use automotive lubricant or 2-cycle outboard lubricant. NOTE: Premium Exact Mix fuel mix will stay fresh up to 30 days. DO NOT mix quantities larger than usable in a 30 day period. PREMIUM EXACT MIX (50:1) GASOLINE LUBRICANT 1 gallon (US) 2.6 oz. 1 liter 20 cc (20 ml) FILLING TANK .Position the product with the fuel cap pointing upward. .Clean surface around fuel cap to prevent contami- nation. .Loosen fuel cap slowly. Rest the cap on a clean sur- face. .Carefully pour fuel into the tank. Avoid spillage. .Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage. NOTE: It is normal for smoke to be emitted from a new engine after first use. WARNING: Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke! ASSEMBLy CAUTION: Make all adjustments to the harness straps before starting the blower to avoid the possibility of injury. AdJUSTING HARNESS STRAPS Harness straps should be adjusted to a comfortable position before starting the blower. To adjust the harness straps: .Blower should be in operating position before adjusting the harness straps. Slip arm through harness strap and onto shoulder, then repeat for the other shoulder. ..Tighten or loosen each harness strap as needed, until they are adjusted to a comfortable operating position. ..Pull on harness straps to secure in buckle. Page 10 Page 11 STARTING AND STOPPING See Figures 6 - 8. Starting the product differs depending on whether the engine is cold or warm. Blower should be on a flat, bare surface for starting. TO START A COLD ENGINE: . Slowly press the primer bulb seven (7) times. . Rotate the choke dial clockwise to the FULL CHOKE position. NOTE: Each choke position is id...
Otros modelos de este manual:Los sistemas de ventilación - MIGHTYLITE UT08981 (2.6 mb)