Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Valid values are in the range 00-7F. b) End String and Define Procedure End String Plus Procedure Read the code to end the string selection and continue defining a new procedure belonging to Method 1. OR End String and Format End String & Format SimijE Read the code to end the string and the format definition. Jj 111 GRYPHON™ D432/D432E 5.3.2 Match Conditions By setting one or more of the following conditions it is possible to select the codes to be formatted. Follow the given steps to define the desired condition: MATCH WITH PREDEFINED SUBSTRING Define Matching Substring Read the above code and: 1. read a number in the range 1-5 corresponding to the desired format number; 2. set the number of characters defining the matching string in the range 00-10; 3. read the corresponding character as Hex value from the Hex/Numeric table identifying the substring character/s. Valid values are in the range 00-7F. (optional) Define Substring Position Read the above code and: 1. read a number in the range 1-5 corresponding to the desired format number; 2. read the number corresponding to the substring position in the range 0-255; AND/OR | MATCH CODE LENGTH Define Code Length Read the above code and: 1. read a number in the range 1-5 corresponding to the desired format number; 2. read the number in the range 0-255; Match Code Length Matching Substring Position Match with Substring 112 CONFIGURATION USING CODE SYMBOLS AND/OR MATCH SYMBOLOGY Define Code Symbology Match Symbology Read the above code and: 1. read a number in the range 1-5 corresponding to the desired format number; 2. set the number of the matching code symbologies in the range 0-4; 3. select the Datalogic Standard Code Identifier from the Code Identifier Table in Appendix C. 113 GRYPHON™ D432/D432E 5.3.3 Format Enable/Disable Format 1 HSHiBjl Sc disabled enabled Format 2 SÊitë = disabled = enabled Format 3 0 = disabled 1 = enabled Format 4 0 = disabled 1 = enabled Format 5 auiSiiE 0 = disabled 1 = enabled Disable All Formats 114 CONFIGURATION USING CODE SYMBOLS 5.3.4 Mismatch Result The result of each format may be set in case the match conditions previously selected are not satisfied. Once the desired formats have been enabled and a code has been read, the results corresponding to each format will be concatenated together and transmitted in the output message. For this reason, it is strongly advised to set the mismatch result for each format. Example Decoded Code:
escáner / copiadora / impresora multifunción - GRYPHON D432E (945.87 kb)