Votos - 2, Puntuación media: 3.5
(
)
)
|
Fotos y especificaciones Brother DCP-165C |
Otros manuales para este modelo:
Resumen del manual
Quick Setup Guide DCP-165C Important DO NOT connect the USB cable yet. a. The LCD shows: No Cartridge b. Open the ink cartridge cover a. 3 Install the ink cartridges 4 d. Unpack the ink cartridge. Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum seal, then remove the cap a. o If all lines are clear and visible, press a (Yes) to finish the quality check. o If you can see missing short lines, press b (No) and follow the steps on the LCD. Connect the power cord Set the LCD contrast (If needed) 7 5 Check the print quality c. Remove the green protective part a. a. When the preparation process has finished, the LCD shows this message. Set Paper and Press Start Press Color Start. OK Poor Set the date and time 8 a. Press Menu. b. Press a or b to choose 0.Initial Setup, and then press OK. c. Press a or b to choose 2.LCD Contrast, and then press OK. d. Press a or b to choose Dark or Light. e. Press OK and then Stop/Exit. a. Press Menu. b. Press a or b to choose 0.Initial Setup, and then press OK. c. Press a or b to choose 1.Date&Time, and then press OK. 6 Set the language (If needed) b. Check the quality of the four color blocks a on the sheet. (black/yellow/cyan/magenta) d. Press a or b repeatedly to enter the last two digits of the year, and then press OK. Year:2008 (e.g. Enter 08 for 2008.) e. Repeat for Month and Day, and Hours and Minutes in 24-hour format. f. Press Stop/Exit. Note If you make a mistake and want to start again, press Stop/Exit to go back to step a. a. Press Menu. b. Press a or b to choose 0.Initial Setup, and then press OK. c. Press a or b to choose 0.Local Language, and then press OK. d. Press a or b to choose your language. e. Press OK and then Stop/Exit. WARNING Warnings tell you what to do to prevent possible personal injury. Note • The components of your box may differ depending on your country. • Save all packing materials and the box in case for any reason you must ship your machine. • A USB cable is not included. You need to purchase a USB 2.0 cable that is no more than 6 feet (2 meters) long. Your machine has a USB 2.0 Full-speed interface. This interface is compatible with USB 2.0 Hi-Speed; however, the maximum data transfer rate will be 12 Mbits/s. The machine can also be connected to a computer that has a USB 1.1 interface. Important DO NOT connect the USB cable yet. Note The control panel warning LED will stay on until you have installed the ink cartridges. f. Gently push the ink cartridge until it clicks. After all the ink cartridges are installed close the ink cartridge cover. Note The machine will prepare the ink tube system for printing. This process will take approximately four minutes. Do not turn off the machine. Start Here Unpack the machine and check the components a. Remove the protective tape and film. b. Remove the plastic bag a containing the ink cartridges from on top of the paper tray. c. Make sure you have all components. 1 Starter Ink Cartridges [x4] Black Yellow Cyan Magenta Accessory Order Form CD-ROM Quick Setup Guide User’s Guide Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these bags away from babies and children. WARNING 1 2Load plain Letter/A4 paper a. Pull out the paper tray. b. Lift the paper tray cover a. c. Press and slide the paper side guides a and paper length guide b to fit the paper size. Make sure that the triangular marks c on the paper side guides a and paper length guide b line up with the mark for the paper size you are using. Important Do not push the paper in too far. d. Fan the stack of paper well. e. Gently put the paper into the paper tray. Check that the paper is flat in the tray. Note When you use Legal size paper, press and hold the universal guide release button a as you slide out the front of the paper tray. 1 f. Gently adjust the paper side guides to the paper with both hands. Make sure the paper side guides touch the edges of the paper. a. Connect the power cord. e. Install each ink cartridge in the direction of the arrow on the label. Take care to match the color of the lever a with the cartridge color b. g. Close the paper tray cover and slowly push the paper tray back into the machine. h. Pull out the paper support a until it clicks, and then unfold the paper support flap b. 1 1 2 1 3 2 3 1 1 2 1 1 1 For Windows® For Mac OS® X What is Innobella™? Innobella™ is a range of genuine consumables offered by Brother. The name “Innobella™” derives from the words “Innovation” and “Bella” (meaning “Beautiful” in Italian) and is a representation of the “innovative” technology providing you with beautiful and long lasting print results. a. Insert the supplied CD-ROM into your CD-ROM drive. Choose your language. b. Click Install MFL-Pro Suite, and click Yes if you accept the license agreements. a. Lift the scanner cover until it locks securely into the open position. a. Connect the power cord. b. When the On-Line Registration screen appears, ...