|
Resumen del manual
This space cannot be shared. • A minimum of 36 inches of clearance is required in the back of each component for general service clearance. Please ensure electrical, space, and supplies are available prior to equipment delivery. Physical requirements • The DocuSP Controller Monitor and Keyboard are designed to be positioned on top of the DocuTech 61XX printer. The controller platform is designed to either be mounted in a stand to the left of the printer, or to be positioned on the floor to the left of the printer. • Warning: Due to safety requirements, under no circumstances should the user interface be visually separated from the printer module. All system installations must enable mobility of the user interface to within 30” (760 mm) of the printer for service and customer maintenance actions. Environmental Requirements Min. Max. Temperature 50 o F 85 o F * Humidity 30% RH 60% RH Heat Emission - with Binder On 22,165 BTU/Hr 14,185 BTU/Hr (With Vent Kits) Heat Emission - with Binder Off 21,265 BTU/Hr 13,609 BTU/Hr (With Vent Kits) Power Consumption Printer/Finisher w/ Binder On 1,330 Watts (Standby) 5,890 Watts (Running) Power Consumption Printer/Finisher w/Binder Off 1,000 Watts (Standby) 5,630 Watts (Running) * The system will inhibit software problems and shut down above 90 o F Operating Supplies Reorder No. Impressions / Unit Dry Ink 6R206 220K/Carton at 6% area coverage Developer 5R161 750K / Carton Fuser Agent 8R2955 250K / Bottle Stitcher Wire 8R1174 32K / Roll Binder Tape - Black 8R2928 425 Binds / Reel Binder Tape – White 8R3601 425 Binds / Reel Binder Tape – Gray 8R3602 425 Binds / Reel Binder Tape – Blue 8R3603 425 Binds / Reel Binder Tape – Brown 8R3604 425 Binds / Reel Binder Tape – Red 8R3824 425 Binds / Reel The Xerox Supplies Marketing Center, 1.800.822.2200, is available for ordering Xerox supplies, including paper and other thruput material. Network Requirements • The Ethernet interface on the DocuSP controller is a 10/100- MB/sec twisted pair standard (10BaseT). • The Ethernet connection to the DocuSP controller must be compatible with the Institute of Electrical and Electronics Engineers (IEEE) 802.3 standard. (The physical form of this connecter is RJ45 and must be correctly wired.) • The DocuSP controller supports TCP-IP, SPX,/IPX, and EtherTalk Link Access Protocol (ELAP) protocols if the proper gateways are installed on the controller. • The DocuSP controller does not provide Novell Server network services. To use the SPX/IPX protocol, a Novell server installed on the network is required. • A Xerox Token Ring solution is available for the 61XX family. When Token Ring is installed, it becomes a Token Ring only connectivity solution. The NetWare gateway and AppleTalk gateway will not function, and the built in Ethernet bge0 twisted pair interfaces are disabled. (Gigabit Ethernet is supported with a Sun controller card – some customers have asked for this option.) Telephone Requirements A voice telephone line is required where the DocuTech 6100, 6115, 6135, is installed. Voice line will be used when the operator, administrator, or Xerox Service Personnel is asked to read the screen information from the DocuSP controller dialogs to Xerox Customer Support or Technical Support Center Personnel. Position / Performance at Maturity AverageMonthlyServiceCalls87654321Average Monthly Copy Volume300K1M2MOptimum Range500K1.5M Note: This product is targeted for the 300K to 2M copies per month market segment. Usage above this range may result in a higher service frequency ...
Otros modelos de este manual:escáner / copiadora / impresora multifunción - 6115 (43.82 kb)