Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
For details about User Utility, refer to the User Utility Reference Manual. Operating Instructions Installation Installation About the installation location • In order to ensure proper operation, install the unit maintaining the proper distances from surrounding objects, as shown in the following illustration. Top View200 mm(7.9 in.) 200 mm(7.9 in.) 200 mm(7.9 in.) Notice •Do not move the unit immediately from a cold place to a warm place. It may cause dew. 1.Remove all packing tapes. 2.Set the LOCK/UNLOCK selector to unlock. a.Open the document cover (A). b. Slide the LOCK/UNLOCK selector (A) to the left to release the lock. 1 c. Close the document cover. 1 Operating Instructions Installation 3. Connect the power cord, AC adaptor, and the USB cable to the unit. Notice • Use only the power cord, the AC adaptor, and the USB cable that are provided with the unit. • Confirm that the scanner for connecting this unit is connected to the computer. • Do not connect more than 1 flatbed scanner to the same computer. (Doing so can cause erroneous behavior on the computer.) 54123 A Power cord B AC adaptor C USB cable D To the scanner for connecting this unit E To the AC outlet 4. Install software (page 15). Operating Instructions Installation Installation System Requirements IBM® PC/AT® or compatible machine Computer with a CD-ROM drive CPU Pentium® III, 1 GHz or higher Operating Windows 2000 / Windows XP / System Windows Vista*1 Interface USB 2.0 Hard Disk 5 GB or more of free space is required. *1 Will not run on 64-bit versions. Note • The above system requirements may not satisfy the requirements of all operating systems. • The scanning speed differs depending on the host computer's operating environment or the application used. • Due to the slower speed of USB 1.1, it is recommended to use a USB 2.0 interface. • If you connect the unit to a USB hub, it is not guaranteed to work. CD-ROM Contents Drivers Device Driver TWAIN*2 ISIS Applications RTIV*3 QuickScan Pro Demo*4 Utilities MCD*5 User Utility Manuals*1 Operating Instructions PIE Reference Manual*6 RTIV Reference Manual User Utility Reference Manual Others Control Sheet*7 Warranty Information (U.S.A. only) *1 All manuals are in PDF format. To view manuals, Adobe® Reader® must be installed. *2 There is no TWAIN application on this CD-ROM. *3 RTIV (Reliable Throughput Imaging Viewer) is our original application software, and does not require either TWAIN driver or ISIS driver. *4 There are some restrictions for QuickScan Pro due to being a trial version. In addition, when using QuickScan Pro, the ISIS driver is required. QuickScan Pro does not work with the 64-bit version of Windows. *5 For details on how to use MCD, refer to PIE Reference Manual and RTIV Reference Manual. *6 PIE is an acronym for Panasonic Image Enhancement Technology. *7 The control sheets are stored as PDF files on the "Drivers & Utilities / Manuals" CD-ROM provided with the unit. To use them, print the control sheets the same size as the document to be scanned. Operating Instructions Installation Installation Be sure to install the software from the CD-ROM included with this unit. You can select from the 4 installation methods below, depending on your needs. a. Complete: Install all of the CD-ROM components. b. All Drivers & Utilities: Install all of the CD-ROM components except for applications. c. Custom: Install one of the drivers, utilities or manuals. d. Application: Select and install RTIV or the QuickScan Pro Demo. Notice • Make sure to log on as an administrator to install the software. • Before installing, make sure to exit all running applications. 1. Turn the power switch to " " (OFF) for both this unit and the scanner for connecting this unit. 2. Insert the included CD-ROM into the CD/DVD drive on your computer. • If you have a feature called "Autorun" activated, the installation process will start automatically. • The setup window will appear. Note • If the AutoPlay dialog box is displayed in Windows Vista, select "CDRun.exe". • If the program does not start automatically, from [My Computer] ([Computer] in Windows Vista), select the CD/DVD drive, and then double-click "CDRun.exe". 3. Select the scanner for connecting this unit from the "Select Scanner" list. 4. Select the desired installation methods from the "Installation" list on the left side of the screen. • If you selected [Complete] or [All Drivers & Utilities], continue to step 6. • If you selected [Custom], continue to step 5. • If you selected [RTIV] or [QuickScan Pro Demo] in "Application", continue to step 6. 5. If you selected [Custom] for the installation type in step 4, select the item that you want to install. 6. Follow the instructions on the screen. • In Windows Vista, if a window appears with the message "Windows can’t verify the publisher of this driver software", continue with the installation by selecting "Install this driver software anyway". 7. Set the power switch of the scanner to " " (ON) for both this...