Votos - 4, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
1. Click [Search by IP Address]. 2. Enter the IP address of the device to be installed. See "Confirming IP Address Settings," on p. 33. If the IP address of the device is between "169.254.1.0 and 169.254.254.255", the IP address is the one assigned by the AutoIP function. If an IP address other than link-local addresses is set for the computer, set an IP address in the same subnet as the computer (other than link-local addresses) also for this machine manually. This enables the installer to search for this machine. e-Manual -> "Setting the IPv4 Address" 3. Click [OK]. If any devices are not displayed by performing the above procedure, click [Display Guide] to solve the problem. 16 8 Select the function you want to use (1) Select the function you want to use (driver to be installed). (2) Click [Next]. (1) (2) [Printer] Select when using the print functions. [Fax (for Supported Models)] Select when using the PC fax function. (This function sends documents or images that were created on a computer directly as a fax transmission.) [Scanner] Select when using the scan functions. 9 Set the printer or fax information (1) Specify the settings for each option as needed. (2) Click [Next]. Printer information*1 Fax information*2 (1) (2) (1) (2) *1 Appears if you selected [Printer] in Step 8. *2 Appears if you selected [Fax (for Supported Models)] in Step 8. [Printer Name] Enter a new name if you want to change the printer or fax name. [Fax Name] [Use as Shared Printer] Select the check box to share the printer or fax. [Use as Shared Fax] [Shared Name] Change the shared name as needed. You can use the following procedure to install the additional driver depending on your country or region. 1. Click [Drivers to Add]. 2. Select the operating system displayed in [Drivers to Add]. 3. Click [OK]. The MF driver and MF Toolbox for 64-bit operating systems may not be supplied depending on your country or region. If a 64-bit operating system is running on a computer on which the installation is being performed, the download installation (installation from a network) for a client computer on which any of the following 32-bit operating systems is running is not supported due to a Windows restriction. -Windows 2000 -Windows XP (on which no service pack or SP1 is installed) -Windows Server 2003 (on which no service pack is installed) If you download and install the software on any of the above 32-bit operating systems, you may fail to install the software and may not be able to open the printing preferences dialog box. If any of the following 32-bit operating systems is running on a computer on which the installation is being performed, the additional driver for a 64-bit operating system cannot be installed. -Windows 2000 -Windows XP (on which no service pack or SP1 is installed) -Windows Server 2003 (on which no service pack is installed) 10 Installation starts when clicking [Start] 18 11 Select the device you would like to make your default printer (1) Select the device you would like to make your default printer. (2) Click [Next]. This screen appears only when installing the printer driver and fax driver. (1) (2) 12 Select to print a test page (1) Select the check box to print a test page. (2) Click [Next]. This screen appears only when installing the printer driver. (1) (2) 13 13 For USB Connection For Network Connection Next, installation of MF Toolbox starts In any of the following cases, MF Toolbox is not installed. Proceed to Step 16. - If you are using Windows 2000 Server, Windows Server 2003, or Windows Server 2008 - If you cleared the [MF Toolbox] check box in Step 4 14 Click [Next] The screens for specifying a location in which the MF Toolbox is installed and position to which the start menu is added appear. Specify the settings in the respective screens, and then click [Next]. Click [Start] in the displayed screen. 15 15 The software for which the check box was selected in Step 4 is installed. Follow the on-screen instructions. 16 Check that [ ] is selected in [Install], and then click [Next] The options to be displayed differ depending on your country or region. 21 17 Restart your computer (1) Select the [Restart Computer Now (Recommended)] check box. (2) Click [Restart]. The CD-ROM may be removed once this screen appears. (1) (2) In the case of USB connection, connect the USB cable after restarting your computer. 21 17 Restart your computer (1) Select the [Restart Computer Now (Recommended)] check box. (2) Click [Restart]. The CD-ROM may be removed once this screen appears. (1) (2) In the case of USB connection, connect the USB cable after restarting your computer. In the case of network connection, check the installation results. See "Checking the installation results," on p. 23. USB cable connection (Only when connecting with USB) USB cable connection (Only when connecting with USB) Remove the cap (A) on the USB port of the machine Remove the cap by pulling out the string. (A) 2 Connect the USB cable •Flat end (A):...
Otros modelos de este manual:escáner / copiadora / impresora multifunción - i-SENSYS MF5980dw (9.14 mb)