and vert, controlled from handlebar COLOUR & MATERIAL Colour of chassis Yellow Material of chassis Metal MEASURES & WEIGHT Weight 117 kg Gross weight 133 kg Package size W*H*L 141x90x80 cm Type of package Wooden frame, board on sides Working width 84 cm Auger, diameter 40 cm, serrated type Impeller diameter 30 cm OTHER FACTS CE-mark Yes Instructions for use 8218-2201-06 EAN bar code UPC

The spiral also drives the machine forward. The snow is ejected about 8 metres. The machine has large controls making it easy to operate even with the gloves still on. The direction of the ejector is comfortable adjusted from the handle. A foldable handle makes the machine easy to store and transport. Equipped with a silent four-stroke 5,0 hp engine. Working width 55 cm. /TIGFt January 3, 2006 18-2825-26 Snow Breeze RS (18-2825-26) ENGINE Brand Briggs& Stratton 4-stroke Power 5,0 hp/3,

mission Friction disc Blocage de différentiel Differential on driving axle Nombre de rapports 6 forward, 2 reverse ROUES Type de roues Maxi-grip tyres Dimension de roues 40 x 17 cm Roulements Ball bearings Chaînes de roues Accessory VIBRATIONS & NIVEAU DE BRUIT Niveau de puissance accoustique 108 dB(A) Vibrations 10,5 m/s2 COMMANDES Démarrage électrique Yes, 230 V Phare Integrated halogen light Guidon Yes Starter Manual Type de contacteur Plastic key Levier d'accélérateur Yes

Equipped with a powerful dual-stage system. The snow is first collected with a saw-toothed spiral and then practically ejected about 12 metres with a fan. The machine is designed for users with high demands. The machine has electric start, integrated halogen light, differential and fuel gauge. Direction and height of ejector is quickly adjusted from the handle. The comfortable handle can be operated with one hand only. Snow chains are available as accessory. Equipped with a low-vibrating 13,0

The chute can manually be adjusted both horizontally and vertically. Self-propelled with one speed forward. Working width 56 cm. SNOW FALL 18-2828-26 January 3, 2006 Snow Fall (18-2828-26) ENGINE Brand Tecumseh Snow King OHV Power 5,0 Hp/3,7 kW FUEL Type of fuel Unleaded Tank volume 1,9 l SPEED CONTROL Number of gears 1 forward WHEELS Type of wheels Snow Hog tyres Wheel size 25 x 10 cm Bearings Brassbearing Driving 1 speed forward Snow chains Not available VIBRATIONS & SOU

Connector (3) – For electrical connection. Cable support (4) – For supporting the connection cable. Deflector lock (5) – Locks the deflector in position. Direction lever (6)– Changes the direction of the discharge chute. Discharge chute (A) – Ejects the snow. Deflector (B) – Determines the distance the snow is thrown. 5 USING THE MACHINE 5.1 GENERAL Never start the engine until all the above measures under ‘ASSEMBLY’ have been carried out. Never use the snow thrower without first reading and und

They are there to remind you of the care and attention required in use. This is what the symbols mean: Warning. If the regulations are not followed, there is a risk of danger to life and machine breakdown. Read the owner’s manual before operating the machine. Keep bystanders at a safe distance from the machine. Warning of hard objects flying off. The power supply must be disconnected before carrying out cleaning or maintenance. Shut off the motor before unclogging the discharge shute. The electr

5.4.1 Starting the engine from cold, Snow Rex 1. Fill the fuel tank with petrol. See previous section. 2. Check that the auger drive lever (9:M) is disconnected. 3. Activate the choke (9:R). 4. Set the stop control (9:N) in the ON position. 5. Press in the primer (6, 9:O) as follows: Above 10°C: Do not press. Between -10 and +10°C: Press twice. Below -10°C: Press 4 times. Lift your finger from the primer between each press. 7. Manual starter: Pull sharply on the recoil starter cord’shandle (9:Q)

Lubriplate. 8 SERVICE AND REPAIRS 8.1 Adjusting cable (Breeze) The auger drive lever’s cable is adjusted at the factory. Any adjustment is carried out as follows: 1. Unhook the cable at the auger drive lever (5:M). 2. Remove the casing and disconnect the cable from the appropriate hole in the plate. See figure 12. 3. Reinstall the cable in the new hole as required. Replace the casing, hook the cable onto the auger drive lever. ENGLISHEN ENGLISHEN 4. Start the snow thrower and check operation. Th

Note the adjustable discharge chute, which enables you to control where you relocate the snow. One hand grip and adjustable skid shoes (no bending required) are also included as standard on all Duo Line throwers. standard on the Duo Line range: Breaks through snowdrifts • Vertically and laterally adjustable discharge chute • One hand grip • Adjustable skid shoes -CD snow BLiZZARD/18-2830-29 snow crystal/18-2814-29 snow CUBE/18-2803-29 snow sPARK/18-2857-29 compact line These easy-to-hand