|
Resumen del manual
• The centrifuge bowl must be handled with care, as it contains extremely sharp parts. • Never use if the centrifuge bowl is damaged. • Do not leave the appliance running nonstop for more than 1 minutes at a time. If the appliance has been running 1 minutes, allow it to cool down before you use it again. Positioning the apparatus • Always place the appliance at the back of the kitchen counter. • Do not place next to hot areas, for example gas rings and electric hotplates. Cord, plug and mains socket • Ensure that the cord is fully extended. • Do not allow the cord to hang over the edge of a table/counter, and keep it away from hot objects and naked flames. • Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way. • If the apparatus or plug is damaged, it must be inspected and if necessary, repaired by an authorised repair engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself. 2. Fruit pulp holder 3. Motor section 4. Locking mechanism 5. Spout 6. Base 7. Centrifuge bowl 8. Power cord with plug 9. Funnel 10. Lid 11. On/Off button 1.2. 3. 4. 10. 9. 7. 6.5. 8. 4. 5. 11. PRIOR TO FIRST USE Before using for the first time, or after prolonged storage without use, wash any parts that will come into contact with food. 14 USING THE APPARATUS o Press the fruits and/or vegetables gently with the Assembly before use: • Place the motor section (3) on a flat surface, e.g. a kitchen counter, and make sure it is standing firmly on the four suckers underneath. • Place the base(6) on the motor section so that the spout (5) fits in the slot on the side of the motor section. • Push the fruit pulp holder (2) up under the drain edge on the base so that it locks on the foot of the motor unit tightly. • Carefully lock the centrifuge bowl (7) onto the base. o Be careful not to touch the sharp parts in the bottom of the centrifuge bowl. o Make sure that the centrifuge bowl sits properly on its base, so that the gear on the bottom of the bowl engages the gear in the base. o Make sure that the centrifuge bowl doesn't sit too loosely on the base and that it rotates evenly. • Place the lid (10) on the appliance so that it covers both the fruit pulp holder and the centrifuge bowl unit. Make sure that the lid fits tightly onto the base. • Turn the lock mechanism (4) to the vertical position and make sure that it engages the lid and locks it fast. The lock mechanism makes a clicking sound when this is done correctly. • Place a glass, bowl or other suitable container under the spout. • The spout must be in the down position to let the juice run out • The apparatus now ready for use. Preparing fruits and vegetables for juicing • Always wash fruits and vegetables thorougly before juicing. • It is not necessary to remove seeds, pits or thin peels before using the appliance. • Fruits with thick peels such as oranges and lemons must be peeled before ju...
Otros modelos de este manual:Licuadoras - 144-002 (1.48 mb)
Licuadoras - 644-009 (1.48 mb)
Licuadoras - 644-012 (1.48 mb)
Licuadoras - 644-013 (1.48 mb)