Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
Microphone 5. Side keys ] In standby mode (opened): Volume of key tone ] In standby mode (closed): 6 Short press - The sub LCD light on. Long press - Only display a wallpaper. ] In menu: scroll up & down ] During a call: volume of the earpiece Note ] To protect the sense of hearing while Folder open, maximum volume level is 3. 6. Multimedia hot key Long press - photo camera activation (Folder opened) Short press - Camera and MP3 menu access 7. Sub LCD 8. MOD key 9. Memory card slot 10. Internal loudspeaker ] Listen to MP3 player without headphones ] Used when speaker phone is activated. 11. Handsfree slot P7200 Features P7200 Features P7200 Features 3 14 52 687 1. Navigation key ] In standby mode: Briefly: List of Favourites Briefly: List of Contacts Briefly: List of Profiles (Hold down: Activate/Deactivate Vibrate mode) Briefly: List of Messages ] In menu: scroll up & down 2. Confirm key 3. Soft keys ] These keys perform the function Indicated in the bottom of the display. 4. Schedular hot key ] Activate the Schedular menu directly. 5. Camera and Multimedia hot key ] Activates the camera (long press) and Multimedia menu (short press) directly. 6. Send key ] Dial a phone number and answer a call. ] In standby mode: shows a history of calls made, received, and missed. 7. End key ] Switch on/off (hold down) ] End or reject a call. 8. Clear key Rear view P7200 Features Camera lens Flash Battery SIM Card Socket Cable Connector /Battery Charging Connector Note ] Please ensure phone is powered on and in idle mode before connecting the USB cable. Battery Terminals Side camera key P7200 Features P7200 Fe ature sMenu Contacts Display Information Icon area Text and graphic area Soft key indications Area Description First line Displays various icons. See page 17. Middle lines Display messages, instructions and any information that you enter, such as number to be dialled. Last line Shows the functions currently assigned to the two soft keys. The screen displays several icons. These are described below. On-Screen Icons Icon/Indicator Description Tells you the strength of the network signal. Call is connected. You can use GPRS service. Shows that you are using a roaming service. The alarm has been set and is on. Tells you the status of the battery. You have received a text message. You have received a voice message. Note ] The quality of the conversation may change depending on network coverage. When the signal strength is below 2 bars, you may experience muting, call drop and poor audio. Please refer to this signal as an indicator for your calls. When there are no bars, that means that there is no network coverage: in this case, you won’t be able to access the network for any service (call, messages and so on). Icon/Indicator Description Vibrate only menu in profile. General menu in profile. Loud menu in profile. Silent menu in profile. Headset menu in profile. You can divert a call. Indicates that the phone is accessing the WAP. Indicates that you are using GPRS. You have activated Bluetooth menu. P7200 Features Installation Installation Installing the SIM card and the handset battery Make sure the power is off before you remove the battery. 1. Remove the battery. Hold the top edge of the battery and lift the battery from the battery compartment. 2. Install the SIM card. Insert the SIM card into the holder. Slide the SIM card into the SIM card holder. Make sure that the SIM card is inserted properly and that the gold contact area on the card is facing downwards. To remove the SIM card, press down lightly and pull it in the reverse direction. To insert the SIM card To remove the SIM card Note ] The metal contact of the SIM card can be easily damaged by scratches. Pay special attention to the SIM card while handling. Follow the instructions supplied with the SIM card. 3. Install the battery. Insert the bottom of the battery first into the bottom edge of the battery compartment. Push down the top of the battery until it snaps into space. 2 1 Charging the Battery Before connecting the travel adapter to the phone you must first install the battery. 1. Ensure the battery is fully charged before using the phone for the first time. 2. With the arrow facing you as shown in the diagram push the plug on the battery adapter into the socket on the side of the phone until it clicks into place. 3. Connect the other end of the travel adapter to the mains socket. Use only the charger included in the box. 4. The moving bars of battery icon will stop after charging is complete. Caution ] Do not force the connector as this may damage the phone and/or the travel adapter. ] If you use the battery pack charger out of your own country, use an attachment plug adaptor for the proper configuration. ] Do not remove your battery or the SIM card while charging. Warning ] Unplug the power cord and charger during lightning storms to avoid electric shock or fire. ] Make sure that no sharp-edged items such as animal teeth or nails, come into contact wi...