Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Select the phone number 1 Press Menu 4-6-6 (Menu > Settings > Network services > Own number selection). 2 Scroll to the phone number you want to use and press Select. Note: The first phone number on this list is selected. You need at least one active number to make calls. You cannot change from one phone number to another during a call. [ 73 ] • USE AUTOMATIC REDIAL There are times when you may not be able to place a call (example: due to the high volume of traffic on the wireless network). When the wireless network is busy or unavailable, Automatic redial instructs your phone to retry the call. ACTIVATE AUTOMATIC REDIAL 1 Press Menu 4-2-1 (Settings > Call settings > Automatic redial). 2 Scroll to On and press Select. If the system is busy, your phone makes three additional call attempts. If you want to stop the automatic redial process before the last attempt, press or Quit. Important: This feature does not automatically retry a number when the number you are calling is busy. • USE 1-TOUCH DIALING You can assign a name from your phone book to a 1-touch dial location, using your phone’s keys 2 through 9. (The “1” key is used exclusively to dial your voice mailbox.) Once assigned, the phone number you associate with that key is dialed automatically when you press and hold the key. Assign a key to 1-touch dialing 1 Press Names, scroll to 1-touch dialing and press Select. 2 Scroll to a number that has the message (empty) and press Assign. 3 Scroll to the name and number to which you want to assign this key and press Select. Repeat these steps as many times as necessary. 4 To call a number using 1-touch dialing, press and hold the appropriate key for a few seconds. Change 1-touch dialing numbers You can change the 1-touch dialing key assignments at any time. 1 Press Names, scroll to 1-touch dialing and press Select. [ 74 ] Advanced calling features 2 Scroll to the key you want to change and press Options. 3 Scroll to Change and press Select. 4 Scroll through the phone book until you reach the new number you want to select and press Select. Erase 1-touch dialing numbers You can erase 1-touch dialing key assignments at any time. 1 Press Names, scroll to 1-touch dialing and press Select. 2 Scroll to the key you want to erase and press Options. 3 Scroll to Erase and press Select. 4 Press OK to confirm. • SET TOUCH TONE STRINGS Your phone allows you to create special sets of numbers known as touch tone strings which will dial a series of digits after a “wait” or a “pause.” For example, you can program your phone to send your account number while you are banking by phone. You must be in the mode to enter these characters. Enter the numbers as usual. When you want to insert the special characters, press repeatedly to switch among *, +, p, w characters. Note: Use caution when sending confidential information if voice privacy is not active. p Creates a pause when a number is dialed. The numbers you enter after this special character are automatically sent as touch tones after a 2.5-second pause. w Creates a wait when a number is dialed. This means that your phone waits for you to press before it sends the number as touch tones. * Sends command strings to the network. Contact your service provider for details. + Use this character to link a 1-touch dialing number to a number in the phone book. [ 75 ] Set manual touch tones 1 Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch tones > Manual touch tones). 2 Select one of the following options, then press Select: Continuous Sounds tone for as long as you press and hold a key. Fixed Sets the tone length to 0.1 second, regardless of how long you press a key. Off Turns off the tones. No tones are sent. Set touch tone length You can also set the length of each touch tone. 1 Press Menu 4-3-2-2 (Menu > Settings > Phone settings > Touch tones > Touch tone length). 2 Use or to scroll to Short or Long. Short sets the tone length to 0.1 second. Long sets the tone length to 0.5 second. 3 Press Select. Store touch tone strings You can store touch tone strings the same way that you store names and numbers in your phone book. You can store an entire sequence of digits and send it as touch tones for frequently used strings of numbers. STORE TOUCH TONE STRINGS WITH PHONE NUMBERS 1 Enter the phone number that you want associated with a touch tone. 2 Enter the touch tone character where needed (p, w, or *). 3 Enter the touch tone string. 4 Store the number as you normally would. [ 76 ] Advanced calling features SEND A TOUCH TONE STRING 1 Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch tones > Manual touch tones). 2 Make sure that the setting is not set to Off. If it is, scroll to one of the other options and press Select. 3 Then, during your call, press Options, scroll to Touch tones and press Select. 4 Enter the touch tone string or recall the string from the phone book, and press OK. If you send touch tones while in the analog mode, be careful not to send confidentia...