Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Channel: the check mark inside All check box indicates that the channel is enabled. To enable or disable this channel press the Select soft key, then select Enable or Disable. The Add channel option allows you to add a new channel to the channel list. Enter the appropriate channel code obtained from your service provider and a title for the channel. Language: selects a language you prefer. Then, You can get cell broadcast messages only in the language you selected. Settings Note: Your settings on your O2 Pay & Go mobile should already be set up for you, if not call O2 customer service using hot key 9 or dial 08705 678 678. Short messages Using this menu, you can set up default SMS information. The following options are available: 109 Messages Service centre: allows you to store or change the number of your SMS centre required when sending messages. You must obtain this number from your service provider. Validity period: allows you to set the length of time your messages are stored at the message centre while attempts are made to deliver them. Message type: allows you to set the message type to Text, Fax, Voice, ERMES, X400, or E-Mail. The network can convert the messages into the selected format. Reply path: allows the recipient of your SMS message to send you a reply via your message centre, if the service is provided by the network. Delivery report: allows you to set on or off. When this function is set to on, the network informs you whether or not your message has been delivered. Character support: allows you to select the character set when editing and sending messages. GSM-alphabet: you can only send the message using GSM characters. Uni-code: you can send the message using Unicode characters, including GSM alphabets. And the maximum number of characters which can be entered in a message is reduced to half in length. Automatic: if you select Automatic, the phone selects the character set according as you use Unicode characters or not. Multimedia messages Using this menu, you can set up default settings for sending or receiving MMS message. The following options are available: 110 Messages Send settings: The following options are available: Priority: allows you to set the priority of message. Validity period: allows you to set the length of time your messages are stored at the message centre while attempts are made to deliver them. Delivery after: you can set the delay time before the phone sends your messages. Address hiding: when this option sets to On, your phone number does not display on the recipients phone. Delivery report: when this option sets to On, the network informs you whether or not your message has been delivered. Read reply: when this option sets to On, your recipient’s phone sends a reply to let you know when your message was read by her/him. Receive settings: the following options are available: Msg. reception: allows you to set how you receive a message. You can select one of Manual, Automatic and Reject. Anonymous reject: when this option sets to On, your phone rejects messages without a caller ID. Adverts reject: when this option sets to On, you can reject advertisements by service provider. Report allowed: when this option sets to Off, your phone does not send a reply to the recipient’s phone even if the sender asks for the read reply. MMS profiles: in this menu, you can configure MMS profile settings that are required when you send or receive multimedia messages. 111 Messages Current profile: allows you to select one profile to use currently. Profile setting: allows you to set up to five profiles. • Profile name: enter the name of the profile. • Server URL: enter the address of profile server. • GSM setting: allows you to change the proxy settings for the GSM network. -Gateway: enter the IP address and IP port. -Data call type: select a network connection type between ISDN and Analogue. - Dial number: enter the server phone number. - Login ID: enter the server login ID. -Password: enter the server password. • GPRS setting: allows you to change the proxy settings for the GPRS network. -Gateway: enter the IP address and IP port. - APN: enter the access point name used for the address of the GPRS network gateway. - Login ID: enter the user ID required to connect to GPRS network. - Password: enter the password required to connect to the GPRS network. 112 Messages • Bearer: select the bearer to be used for each type of network accesses. - GPRS only: it only work in GPRS network. -GSM only: it only works in GSM network. Memory status You can check the memory status for messages. Short messages You can check how many messages are stored in SIM card and phone’s memory. When you have finished, press the soft key or the key to exit. Multimedia messages Multimedia message boxes, Camera and Media box share a given amount of memory in your phone. The display shows the status of free and used memory. You can see the used memory status of multimedia message boxes, Camera and Media box by pressi...
Otros modelos de este manual:Celulares - SGH-E800N (5.95 mb)