Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
yyYou may need additional operation for iPod touch or iPhone, for example “unlock” by draging the slider. ,,Note Setting the Clock Connect the iPod/iPhone firmly. Then the clock setting in the display window will synchronize with your iPod/iPhone. After the unit synchronized with your iPod/iPhone for clock setting, there will be a time difference between the iPod/iPhone and the unit . In standby mode, the clock won’t synchronized with your iPod/iPhone. Check the current time on iPod/iPhone is correct or not. If not, reset it correctly depending on present time. Wrong time on the iPod/iPhone may result in the time difference between your iPod/iPhone and the unit. ,,Note Using your unit as an alarm clock 1. Turn the unit on or off. 2. Press and hold ALARM to set the alarm function. 3. The alarm sound sources blinks. (FM(TUNER)/ IPOD). While each of sound sources blinks, select the one you want by pressing D/Pr. If you select FM(TUNER) mode, you can select the station you set before by pressing / . 4. “ON (TIME)” setting is displayed. The hour setting blinks. Press / to select the hour and then press D/Pr to save. 5. The minute setting blinks. Press / to select the minute and then press D/Pr to save. 6. The volume settings blinks. Press / to change the volume and then press D/Pr to save. 7. You can check the setting status. 8. If you want to reset the alarm, repeat steps 2-6. SNOOZE While alarm activates, snooze function wakes you up every 10 minutes if you press SNOOZE/SLEEP. If the time you set is up, the unit turns on automatically and the alarm function works. If you press SNOOZE/SLEEP, the alarm function stops working. “ZZZ” and “ ” will blink. The alarm sounds again in 10 minutes. Dimmer Press SNOOZE/SLEEP once. The display window will be darkened by half. To cancel it, press SNOOZE/SLEEP repeatedly until the display window get bright. ••If you don’t set clock on your iPod/iPhone, the unit will not be synchronized for the clock with your iPod/iPhone . ••If you unplug the cord from an outlet, the clock setting you set won’t be stored. ••After setting a clock function, you can set alarm function. ••Since the alarm goes off if you don’t press any button for 30 minute, the alarm will stop working automatically. •• If you set the clock and alarm, you can check the time and alarm icon ““ by pressing ALARM although the unit is stand by mode. ••If you activate the alarm, the alarm icon “ “ will appear in the display window. ••If you deactivate the alarm, the alarm icon ““ will disappear in the display window. ••Alarm function only works when the unit is turned off. ••If the time you set is up, the unit will be turned on automatically. ••After alarm function works, you can turn it off by pressing ALARM or P/1. ••You can only set 12 : 00. (for an PM display) ,,Note Sleep Timer Setting While listening to music or radio, press SNOOZE/ SLEEP repeatedly to select delay time between 10 and 180 minutes. After delay time, the unit will turn off. (You can see the following order, 180 -> 150 ->120 -> 90 -> 80 -> 70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10) To cancel the sleep function, press SNOOZE/SLEEP repeatedly until the display window get bright. ••You can check the remaining time before the unit turns off by pressing SNOOZE/ SLEEP. ••Sleep function will work after dimmer function. ,,Note Radio Operations Antenna Connection Connect the FM wire antenna to FM antenna connector. 1. Press P/1 repeatedly until FM appears in the display window. The last received station is tuned in. 2. Auto tuning : Press / for about 2 seconds until the frequency indication starts changing, then release. scanning stops when the unit tunes in a station. Manual tuning: Press / repeatedly. 3. Adjust the volume by pressing - / + (VOLUME) . Presetting the Radio Stations You can preset 10 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press P/1 repeatedly until FM appears in the display window. 2. Select the desired frequency by using / . 3. Press and hold D/Pr . A preset number will blink in the display window. 4. Press / to select the preset number you want. 5. Press D/Pr. The station is stored. 6. Repeat the steps 2 to 5 to store other stations. 7. To listen a preset station, press D/Pr and then / to select a preset station. ••If all stations have already been preset, “FULL” will appear in the display window for a moment and then a preset number will blink. To change the preset number, repeat the steps 4-5. ••You can not delete preset stations. ••Although all stations were preset, you can preset a station by overwriting the previous station. ••While listening to radio if you press and hold D/Pr , a preset number you listened to lastly will blink first to overwrite the previous station. ••While listening to a preset station if you want to change it’s preset number at a same frequency, press and hold D/Pr. And then change a preset number by pressing / . ,,Note Advanced Operation Listening to music from your externa...