Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
If necessary drill a third W (6mm) diameter hole for routing power wires. (See Figure 1.) 3. Attach power wires to suitable switch, 3.0-amp fuse, and power source. 4. Insert mounting screws through base and the supplied rubber gasket. Use #10 stainless screws to fasten horn to deck. Apply marine sealant to horn base and wire hole. © 2003 Attwood Corporation 1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com...
Otros modelos de este manual:Equipo de seguridad - 11474 (433.77 kb)
Equipo de seguridad - 11473 (433.77 kb)