Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Read these notes carefully before putting the unit into operation. Extended absence / thunderstorms Always switch the unit off via its mains switch (at front left on unit) during periods of extended absence or at the onset of thunderstorms. This also applies to any other equipment that is connected to the receiver. However, take into account any possible timer programming and switch the unit on again in good time prior to the recording time. Mains lead Make certain that the mains lead (power supply lead) is undamaged. Never put the unit into operation if the mains lead is damaged. Cleaning Withdraw the mains plug before cleaning the unit. Use a dry cloth for cleaning. Clean the surface only and nothing else. On no account open the housing. There is a risk of electric shock if components within the unit are touched. Children-at-play Pay attention that children do not insert objects into the ventilation slots. There is a risk of mortal danger due to electric shock. Repairs If your receiver needs repairing or changes to settings, have qualified specialists carry this out. Unauthorised opening and attempts at repairs entail loss of guarantee. The unit’s electrical safety can be affected by improper tampering with it. The manufacturer’s liability excludes accidents occurring to the user when the unit is opened. Connections The unit may be rendered inoperative or not work properly if the connections are not wired up properly. Important notes for siting and installation. Place of installation Every electronic device generates heat. The rise in temperature, however, lies within a safe range. Slight colour changes may occur to sensitive furniture surfaces and veneers over the course of time due to the constant effect of heat. In conjunction with treated furniture surfaces, the unit’s rubber feet can likewise give rise to changes in colour. Where necessary place the unit on a suitable pad. Ventilation The heat that is generated in this unit is dissipated quite adequately. Never install the receiver in a cabinet, shelf or rack with inadequate ventilation. Never close off the cooling slots on the unit. Do not place objects on top of the unit. Maintain a clearance of at least 10 cm above the unit so that the heat generated within the unit is conducted away without obstruction. Humidity, exposure to sunlight, heat Protect the unit against humidity, drips and splashing. Do not place the unit close to radiators nor expose it to direct sunlight. Mains voltage Operate the receiver only from a 230V / 50 Hz mains voltage. The unit must not be connected to the mains and switched on until after the connections have been set up for the antenna and TV set. Grounding The parabolic antenna is to be grounded in accordance with regulations. The relevant local and/or German VDE regulations are to be complied with here. Controls, displays and connections This section contains a brief description of all the control elements, displays and connections. The key symbols presented here are also used when describing operating sequences. View of front panel (Flap folded down) 1 2 3 4 5 6 7 8 9 10 View of rear panel Front panel controls and displays Rear panel controls and displays 1 On/Off switch (with mains separation) 2 Menu button to call up or exit from menus or submenus 3 Indicator to confirm remote control signal 4 Select button to confirm a selection 5 Power indicator 6 Standby indicator 7 Cursor keys to step through menus and programmes, and for adjustment of the volume (corresponds to the remote control) 8 LED display (4-charachter 7-segment display) for display of programme position, time, play and record 9 Common interface for Pay-TV cards*) 10 Pressure catch for front flap Open by lightly applying pressure on the upper right-hand side 1 Audio output 2 Cinch sockets, left and right channel 2 Dolby Digital-output (AC3) 3 Video output (FBAS) 4 Scart socket TV connection 5 Scart socket VCR/AUX connection 6 DATA socket Interface for serial data transmission (Service) 7 Satellite IF signal input Output of the LNB supply voltage and control signals (22-kHz and DiSEqC 1.1) 8 Satellite IF signal output looped-through Sat IF signal 9 Mains voltage supply line *) CA module and Pay-TV cards are not included in delivery. Textfeld: I000 Textfeld: 1 2 3 4 5 6 7 8 9 Remote control handset keys Legende mit Linie (3): s Sound selection menu / Language selection Moves channel to another position Legende mit Linie (3): z Programme info EPG programme guide Locks channels Legende mit Linie (3): ou Programme selection / Selection of submenus and menu entries Legende mit Linie (3): l Mute (On/Off) Legende mit Linie (3): 0...9 Numerical input for programmes, parental lock, LO frequency etc. Legende mit Linie (3): T Setting Scart connection Radio Off Deletes a channel Legende mit Linie (3): - + Volume / Menu entries Legende mit Linie (3): O Confirmation of the submenus and main entries Legende mit Linie (3): R Radio On/Off Selects mode of programme lists Le...