Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Antenna Alternative Select the target antenna for Manual Search. The Satellite Name helps you select Antenna Alternatives. This is only for reference and cannot be changed on this menu. Frequency Use the Numeric buttons(0~9) on the remote control unit. Polarisation Use the buttons to select the Polarisation of the transponder. (Auto, Horizontal, Vertical) • Horizontal : 18 V are output through LNB line • Vertical : 13.5 V are output through LNB line Symbol Rate Inputs the Symbol Rate of the transponder you want to find. Use the buttons or Numeric buttons on the remote control unit. FEC (Forward Error Correction) Use the buttons to select the Forward Error Correction of the transponder. You can select the value of Auto, 1/2, 2/3, 3/4, 5/6 and 7/8. Network Search • You can select Yes or No. When you select “Yes”, you can find more transponders using the home network. • As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponder besides the transponder that the user inputs. Automatic Skip • You can select Yes or No. When you select “Yes”, the search will skip all scrambled services. • When the found services are scrambled during searching, they are not listed up. Refer to descriptor of PMT whether it is scrambled or not. 27 Guide of Main Menu 27 Guide of Main Menu Advanced Search Performs a manual search with the ability to enter PID(Video/Audio/ PCR) values. This mode is necessary when you search for the signal that has abnormal service Infornation tables. The setting of the sub items is the same as Manual Search. Video PID/Audio PID/PCR PID You can set PID to search for services. 1. Use the buttons to select PID input mode. 2. Use the Numeric buttons(0~9) buttons on the remote control unit to enter a decimal PID value. 3. In the hexadecimal input mode, press one of (0~9) buttons to display a hexadecimal keyboard. 4. Enter a hexadecimal PID value. N NNNNo oooot tttte eeee : If no PID is input(Auto is displayed), the Advanced Search functions same as Manual Search. 5. After the above mentioned value is set, press the button to start Service Search. N NNNNo oooot tttte eeee : The picture and the found service list during Advanced Search are identical with the ones during Manual Search. SMATV Search In case that several generations use Antenna and LNB in common, as the frequency range of signal is input to STB is down as much as LNB L.O.(Local Oscillator) frequency, search the service from 950 - 2150MHz. Frequency Inputs not RF frequency but the frequency that is down converted through LNB in common. The unit is MHz and the range of input is 950 - 2150MHz. Symbol Rate Inputs the Symbol Rate of the signal you want to find. FEC You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or Auto. LNB Power As there is whether the LNB Power of STB is necessary or not according to the sort of IF-IF converters, select a suitable option for situation. Automatic Search Automatic Search When you enter the Satellite Name that is set in Antenna Setting menu, search all of the selected satellite without inputting the extra frequency. Antenna Alternative Select the target antenna for Automatic Service Search. The attribute of this antenna alternative number is already set in Antenna Setting menu and the Satellite Name is helpful in the selection of the antenna, but in this menu you cannot change the Satellite Name. Search Type • You can select one of two modes(Quick or Detail). • When you select Quick mode, it searches the service by search parameters that is preset. • When you select Detail mode, it searches the service through all field of tuner(950 - 2150MHz). Detail Mode The pre-fixed symbol rate list is changed according to Antenna Alternative and Satellite Name. If you want to add or change it, press the Red( )button. ** The value of Pre-fixed symbol rates can not be editable. (22000, 27500) The picture of the Symbol Rate Add/Change mode is as follows: 1. When you press the Red( )button after entered to detail mode from search type, yellow box will be trimmed with red edges meaning edit is possible. 2. You can easily put optional value with using Numeric buttons(0~9). 3. Press the Red( )button for confirmation, and you will successfully exit from input mode. If press the button at symbol rate value input mode, the value will be confirmed, and if you moves left or right )button to exit from input mode. buttons, you can differ values of symbol rate to input. Then press the column use the and the Red( To delete a Symbol Rate in the above list, press the 0 (Numeric button) in the selected position and then the symbol rate disappears. The range of Symbol Rate that is input additionally is 16-30Ms/s. N NNNNo oooot tttte eeee : The user should select the Satellite name in Antenna Setting menu. When the user types the Satellite Name separately, the search type is fixed to the Detail mode. Press the button anywhere to start Automatic Search. The picture during sear...