Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
7. No PIN-Code information is given. • The default PIN-Code is always 0000. • The default PIN-Code is 1234 for Parental Control. (IR-ACE II UBI only) • The default PIN-Code is 8272 for Channel List and Installation. (IR-ACE II UBI only) 8. Channel search does not work. • Make sure that the antenna setting in the menu is correct. 9. Cannot update new software. • You can get an update. If the product does not show a message requesting update, that means no software is available. 10.Cannot watch scrambled channels. • Check that you have the appropriate Smartcard. Reinsert the Smartcard and make sure it initializes correctly. • Check in the menu that the product is detecting the Smartcard. • Check in the menu that you have a valid and working subscription to the channels you wish to view. • Ensure that the Smartcard is not damaged. 11.Cannot watch pay channels. • Check in the menu that you have a valid and working subscription to the channels you wish to view. • Contact your network operator for more information. . . %/)).%/)). %. :. ; . Error message Possible causes What to do No or bad signal The satellite dish is not pointing at the satellite. Adjust dish alignment. Signal is too weak. Increase the LNB voltage or connect a signal amplifier. Satellite dish is too small. Change to a larger dish. Problem with LNB. Change the LNB. Wrong antenna setting. Set the antenna correctly. The channel is scrambled or not available. The channel has a signal, but no audio or video is provided. Confirm if the channel is currently on air. The channel has not been deleted by broadcasting company. Remove the channel from the channel list and check for new transponder details. The channel is for data broadcasting. The channel cannot be viewed with the appropriate model that supports data channels. Smartcard is not plugged in. Insert Smartcard. Wrong Smartcard is in use. Insert the appropriate Smartcard for the channel(s) you wish to view. Smartcard is not plugged in correctly. Reinsert Smartcard; ensure that it is inserted correctly. Smartcard is damaged. Contact your Smartcard retailer or channel broadcaster for a Smartcard replacement. Audio not available. The channel has a video signal, but no audio is provided. Press the audio button on your remote control to confirm that the channel has audio options. Short LNB LNB cable is short. Replace LNB Cable. LNB is internally short. Replace LNB. LNB In port is inserted by alien substance or damaged. Remove the alien substance and contact local service center in case damage has occurred. . . %/)).%/)). %. ) . Tuner & Channel Input Connector IEC 169-24 female (F-Type) Frequency Range 950MHz to 2150MHz Signal Level -25 to -75 dBmV LNB Power & Polarization Vertical: 13.5V Horizontal: 18V Current: Max. 500mA, Overload Protection 22kHz Tone Frequency: 22±4kHz Amplitude: 0.6±0.2V DiSEqC Control Version 1.0/1.2/2.0 Compatible, USALS Demodulation QPSK Input Symbol Rate 1~45 Ms/s FEC Mode 1/2, 2/3, 3/4, 5/6 and 7/8 MPEG Transport Stream A/V Decoding Transport Stream MPEG-2 ISO/IEC 13818 Profile Level MPEG2 MP@ML Video Input Rate 15 Mbit/s Max Aspect Ratio 4:3, 16:9 Video Resolution 720 x 576, 720 x 480 Audio Decoding MPEG-2 Audio/MusiCam LayerI&II Audio Mode Single/Dual/Joint stereo/Stereo Memory Flash Memory 2 Mbytes Graphic (MPEG)/System DRAM 16 Mbytes RF Modulator RF Input/Loopthrough output 75 , IEC 169-2 Frequency 47 ~ 862 MHz Output Channel CH 21~69 TV Standard PAL B/G/I/D/K . . %/)).%/)). A/V & Data In/Out Video 1 Output RCA (CVBS) Audio 2 Output RCA (Audio L/R) RS-232C 9 pin Socket type Power Supply Input Voltage 90~250V AC, 50/60Hz Type SMPS Power Consumption Operation -Max. 30W Standby – Max. 9W Protection Separate internal fuse & Lightning protection Physical Specifications Size 260 x 50 x 182 mm Weight (Net) 1.2 Kg Operating Temp 0.Cto+45 .C Storage Humidity 5%~95% RH (Non-condensing) %/)).%/)). %. 2. . )). Information concerning troubleshooting, software upgrade and product support is provided in the following websites and call centers. Should your product require warranty service, please contact HUMAX to obtain the appropriate authorization. -;/. #. . ( Tel: 01805-778870 (€0,14/min) Opening Hours: Mo-Fr 8:00-23:00 Uhr, Sa-So 8:00-20:00 Uhr E-mail: support@humax-digital.de Website: Language: Deutsch/English/Turkish = Tel: 0870 247 8800 Opening Hours: Mon-Fri 8:30-21:00 E-mail: uksupport@humax-digital.co.uk Website: Language: English ;#: 769 >/:8 Tel: +971 (0)4 359 2323 Opening Hours: Sat-Wedn 09:00-18:00 Thurs 09:00-14:00 (Closed on Fri) E-mail: callcenterME@humaxdigital.com Website: Language: Arabic/English . . &/)). &/)). / # Tel: 1800 613 011 Opening Hours: Mon-Fri 9:00-17:30 E-mail: techinfoau@humaxdigital.com Website: Language: English * # Tel: 899 100 080 (€1+ VAT/min) Opening Hours: Local time in Italy (GMT+1) Mon-Fri 8:00 – 18:00...
Otros modelos de este manual:receptores de satélite - IR-FREE (395.57 kb)
receptores de satélite - IR-TWIN (395.57 kb)