Votos - 2, Puntuación media: 4 ( )

Fabricar: Philips Tamaño del archivo: 311.5 kb Nombre del archivo: Idioma del manual:

3.6 SELECTING THE CHANNEL LANGUAGE Press the A key to display the language selection menu. The number of available languages depends on the particular channel. The choice of language is made as usual using the Wand Vkeys. The language originally set remains selected when you quit the menu using the E key. The selected language is stored when you quit the menu using the OK key. N.B.: Please note that many channels only offer one language. Many radio stations do, however, offer up to 20 or more «sub»-channels. These channels can be selected in radio mode also by pressing the A key. 3.7 ADJUSTING THE SOUND a) The volume of the receiver can be adjusted in 20 stages using the C or B keys. L 2 0 The current volume level is indicated in the channel indicator. b) Switching the sound c on/off (mute) - when the sound is switched off, the OSD displays a message for approx. 2 seconds. The «mute» function is cancelled by pressing the volume keys C or B again. 3.8 TIMER The timer programming menu is accessed by pressing the G key. Up to 8 timer events can be input for TV or radio channels, as required. N.B.: Please note that the video recorder must also be set to identical recording times. N.B.: Please note that the remote control is not active during timer recording to prevent accidental recording of OSD messages. The volume is switched to full level during recording. r E c If the remote control is activated, the channel indicator on the unit displays «r E c» to indicate that a timer recording is currently active. E n d The timer recording can be interrupted prematurely only via the G key. After interrupting the recording, the display indicates «End». The unit then reverts to normal operation. If a timer recording is started from standby mode, the unit reverts to standby mode after the recording has finished. 1...8 Select the next free input field using the number keys 1...8 or using the Wor Vkeys. BC Select consecutively the input fields for {Date} {Start} {Stop} and {Channel} (the input field is highlighted in white). OK Activate the input for the selected field using the OK key (the input field is highlighted in black). Input the appropriate event either directly via the number keys 0...9 or by scrolling through the options using the BC keys. OK Confirm your selection using the OK key and select the next input field. E After inputting {Date} {Start} {Stop} and {Channel}, you can exit the timer menu by pressing E and quit or input further timed events. You can also programme the timer for radio programmes in the Programme section using the R key. If the data for timer programming are transmitted, they can also be transferred directly to the timer via the menu ‘EPG... preview’ using the G key. GB 9 Deleting timer programming: 1...8 Select the timer row to be deleted using the number keys 1...8 or the W or Vkey OK and delete the programmed data using the OK key. N.B.: If you accidentally delete a row and wish to reconstitute the original information, exit the timer menu by pressing the E key twice. N.B.: The time and date are programmed from the DVB data transmitted by the channel. Please correct the ‘Time offset’ in the Installation menu when switching from summer to winter time and vice versa. CET summer time = {+2 h} CET winter time = {+1 h} Please note that some ‘exotic’ channels do not transmit correct time signals. Check the date and time in the ‘Timer programming’ menu when performing programming. 3.9 EPG - PROGRAMME INFORMATION (BASIC NAVIGATOR) The EPG (Electronic Programme Guide) contains information on current and subsequent programmes. The extent of this channel-related information is determined by the individual provider and varies greatly from one channel to the next. Many channels are also transmitted without usable additional information (SI data). This is also the case for the preview. Some providers do not transmit any data; others already transmit a preview, including additional information, up to a few days in advance. The EPG information is accessed and quit using the i key. a) Current and next programme i shows the title, start and end of the current programme, and additional information on the programme, depending on the provider. i shows the title, start and end of the next programme, and additional information on the programme, depending on the provider. i to exit channel information again. E to exit channel information immediately. b) Further preview and additional information i Activate the basic navigator, show information on the current programme. OK Access the preview. Depending on the provider, you receive a list of programmes for the current day or for several days in advance. You can skip forward or backward to the desired programme row-by-row or page-bypage using the WVor BC keys. OK Once you have selected the desired programme, you can consult additional detailed information using the OK key. If no additional information is available, you will receive the relevant message. If the text ...

Descargar ahora

Introduzca dos números de la imagen: