Votos - 5, Puntuación media: 4.8
(
)
)
|
Resumen del manual
The cable should be 75ohm Impedance coaxial twisted at the end with an “F” type connector. 3. CONNECTING THE RECEIVER TO TV To connect the receiver with your television, you can use four methods; Via SCART cable, RF cable, RCA cable or Color component(Y, Pb, Pr) cable. Color component(Y, Pb, Pr) provides the more faithful reproduction of the colors. Connect the RF cable to the terminal marked “RF OUT” at the rear panel of STB and Its other end to the TV RF Input socket. In the case of connecting your TV through SCART cable, connect the SCART connector marked TV to the respective SCART port on the TV. 4. CONNECTING YOUR ANALOG RECEIVER To facilitate the user using analog receiver to view analog channels, STB has been provided with a loop through terminal marked as “LOOP”. Connect the coaxial cable from this terminal to the IF Input terminal of your analog receiver. Now by keeping the STB In standby, you will be able to tune and view analog channels from your analog receiver. 5. CONNECTING YOUR VCR To connect a VCR or DVD player, the STB has been provided with SCART at the rear marked “AV2”. Using a SCART connector, the VCR or DVD player can be connected to the receiver. Note : This Is supported by standby. 6. CONNECTING EXTERNAL AUDIO / HI-FI SYSTEM To connect any external Audio HI-FI system, the receiver has been provided with two RCA connectors at the back of the receiver, marked with AUDIO L and R respectively to connect the left and right Audio. 7. CONNECTING DIGITAL AUDIO SYSTEM Connect a fiber optic cable between Optical SPDIF on the receiver and Optical SPDIF on the Digital Audio System. GB-4 CONNECTING YOUR "STB" 8. INSERTING COMMON INTERFACE CAM(CONDITIONAL ACCESS MODULE) AND SMARTCARD (for model DSB-B350W) The STB supports Common Interface CAMs under DVB specification. The Cl CAMs Include a built-in smart card reader. • Insert the smart card Into the CAM gently with the gold colored chip upwards • Slide In the CAM gently Inside the slot so that It sits In the socket tightly. • To remove the CAM push the button provided by the side of the CAM slot. The CAM will be ejected from the socket. Note : The following Common Interface CAMs are available now: IRDETO, CONAX, CRYPTOWORKS, VIACCESS, NAGRAVISION, SECA, Etc. Connecting Figure You can set the various media settings you want. Place the cursor on this sub menu (System Setup media setting menu) and press OK. • Press the ▲ / ▼ keys to move the sub Items and press the < / ► keys to select the option. • Press the OK key to confirm. • Press the MENU/EXIT keys to exit the menu. • Select the TV system : PAL, SECAM, NTSC, PAL -»(auto) NTSC, SECAM (auto) NTSC, NTSC -»(auto) PAL, NTSC -»(auto) SECAM • Select the TV type according to your TV: STANDARD 4:3 ratio or WIDE SCREEN 16:9 ratio type. • Select the aspect ratio conversion : Letter Box, Pan & Scan, Mixed or Full. • Select the Vdeo Signal Type : Composite, Composite + RGB, Composite + YUV or S-Video • Dolby digital auto selection : On, Off • Subtitle automatic selection : On, Off, Hard of hear • Select the RF Channel: Ch 21 ~Ch 69 • Select Broadcasting System : B/G, I or D/K Note : Selecting RGB video signal out, YUV (YPbPr) video out turns off. Selecting composlte+YUV video signal out, YUV (YPbPr) video out turns on. RECEIVER GB-5 DESCRIPTION Front Panel 1. (I)/I This key is for turning the receiver on and Standby. 2. SELECT This key is for entering and confirming any data to the receiver in the menu system. This key is for selecting the item. Press while viewing TV and a list of channels is displayed. 3. /\ , V These keys are for changing the channels during watching TV and for moving the highlight bar for selecting options on the menu. 4. < , > These keys are for increasing and decreasing the volume level manually during watching TV and for moving the highlight bar for selecting options on the menu. 5. Card Slot Slot for Viaccess smartcard. 6. 7 Segment Display This LED display will show the current channel number. While the receiver Is in Standby mode, the display will show the current time. 7. Infrared Sensor 8. CA Module Slot This is to receive the IR commands from the Remote Control Unit. In the slot you can use a CA module from a service provider of your own choice. (For model DSB-B350W) NotB : CA modules and smart cards are only distributed by service Providers and special distributors, not by SAMSUNG. GB-6 DIGITAL SATE DESCRIPTION Rear Panel 11 10 9 8 7 6 5 4 3 2 1 1. AC MAINS 2. 0/12V 3. RS 232 DATA PORT This is to plug in the AC mains power cord. The input AC voltage range is 100V to 240V-, 50Hz/60Hz supply. This Is for connecting to an external LNB switch. This is for connecting your receiver to a computer for reading and loading data information. 4. ANT.IN This Is for connecting your local RF channels to your TV through Loop. 5. RF OUT This Is for connecting to your TV via RF cable. 6. AV SCARTS This is for connecting t...
Otros modelos de este manual:receptores de satélite - DSB-B350V (9.85 mb)