Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference. 2 This device must accept any interference received, including interference that may cause undesired operation. • This device is for mobile and fixed use only (not portable or body-worn). A separation distance of 20cm must be maintained at all times between the antenna and the body of the user and bodies of nearby persons. • If the WMT (RF Server) software is shutdown, the RS-485 network MUST be physically disconnected from the PC as the serial port is no longer being controlled by the software and may disrupt communications between multiple Base Radios. • This device has been designed to operate with an antenna having a maximum gain of 9 dBd. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. • To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP (Equivalent Isotropically Radiated Power) is not more than that required for successful communication. • The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website FCC Certification • This product is a frequency hopping RF transceiver module for the 900 MHz ISM band, designed to meet FCC 15.247, and is used in industrial control and monitoring applications. The antenna is factory installed and MUST NOT be removed or modified by user. This document cannot be changed without prior FM approval Text Box: Copyright 2006 by Honeywell International Inc. Rev. 4- 08/30/2006 While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customers. In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and specifications in this document are subject to change without notice. Honeywell® and TotalPlant® are U.S. registered trademarks Of Honeywell International Inc. Other brand or product names are trademarks of their respective owners. Text Box: Honeywell Inc. Industrial Measurement and Control 2500 West Union Hills Drive Phoenix, AZ 85027 About This Document Revision Notes The following list provides notes concerning all revisions of this document. Doc ID Rel ID Date Notes 34-XY-25-05 Rlse. 0 12/03 1st issue of document. 34-XY-25-05 Rev. 1 02/04 2nd issue of document. 34-XY-25-05 Rev. 2 06/04 Reformatted layout, updated technical information. 34-XY-25-05 Rev. 3 05/05 Updated Modbus Info. 34-XY-25-05 Rev. 4 08/06 Updated for version 1.70 software release. Contacts World Wide Web The following lists Honeywell’s World Wide Web sites that will be of interest to our industrial automation and control customers. Honeywell Organization WWW Address (URL/e-mail) Corporate Industrial Measurement and Control International Field Instruments Technical Assistance Center ACE@Honeywell.com (e-mail) Telephone Contact us by telephone at the numbers listed below. Organization Phone Number United States and Canada Honeywell Inc. Industrial Automation and Control Global Technical Support Center 1-800-343-0228 Sales 1-800-525-7439 Service 1-800-423-9883 Asia Pacific Honeywell Asia Pacific Inc. Hong Kong (852) 8298298 Europe Honeywell PACE Brussels, Belgium [32-2] 728-2111 Latin America Honeywell Inc. Sunrise, Florida U.S.A. (305) 364-2355 Table of Contents TABLE OF CONTENTS........................................................................................V TABLE OF FIGURES..........................................................................................VII 1 INTRODUCTION.............................................................................................1 1.1 USING THIS MANUAL.........................................................................1 1.2 ABOUT THE DEVICE...........................................................................1 1.3 UNPACKING......................................................................................2 1.4 SOFTWARE COMPATIBILITY................................................................2 2 QUICK START................................................................................................3 3 INSTALLATION..............................................................................................5 3.1 MECHANICAL INSTALLATION...............................................................5 3.1.1 Base Radio Positioning.............