Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Before and after styling your hair(Fig.3) 1 Dr y your hair with a towel. 2 Connect the plug to a power supply socket. 3 Snap a suitable attachment onto the styler with the grooves aligned, and turn the attachment left. » You will hear a “click”, and the attachment is locked in place. 4 Slide the airflow switch( in Fig.1) to gentle and cool airflow for fixing your hair style, strong and warm airflow for fast dr ying and styling, or the ThermoProtect setting for gentle dr ying and styling, preventing your hair from overheating. » If the appliance is powered on, ions are automatically and continuously dispensed to provide additional shine and reducing frizz. 5 To disconnect the attachment, press the release button ( , Fig.1) and pull it off. Tip • After styling, apply hair spray or mousse to fix your hairstyle. Create natural straight hair (Fig. 4) (HP8656 only) 1 Put the paddle brush ( in Fig.1) on your hair. 2 Brush through your hair slowly with the paddle brush, just like you would with a normal brush. 3 Brush your hair backward as you like. Tip:You may brush underneath your hair to get a more bouncy hairstyle. 4 When finished, use your fingers to shape your hair. Create more volume at roots (Fig. 5) 1 Slide the volumizer( in Fig.1) into your hair, about 3 cm away from the par ting of your hair. 2 While holding the appliance horizontally, move the volumizer slowly towards the centre of your head, allowing hair to be pushed against the volumizer thus creating a little buildup of hair on the volumizer. 3 Hold the appliance with the volumizer for 7-10 seconds. 4 Tilt your hand so that the volumizer rests at an angle on your head. 5 Remove the volumizer from your head, releasing the hair that was on the volumizer. Repeat steps 2-5. 6 When finished, put your fingers into your hair and push it towards the centre of your head. Adjust the volume on your hair as you like. Create inward/outward flicks(Fig. 6): 1 Comb your hair and divide it into several locks of hair. 2 Take a lock of hair, and brush it with the thermobrush ( in Fig.1) downwards. Then, at the hair tips turn the brush inwards or outwards. 3 Hold the brush in that position for 7 to 10 seconds, and then remove it from your hair. Repeat step 2 and 3 to the rest of your hair. 4 When finished, use your fingers to shape your hair ends. Adjust the flicks as you like. Create loose curls(Fig. 7): 1 Turn the bristle retraction knob ( in Fig.1) of the retractable bristle brush( in Fig.1) to extract the bristles. 2 Wind a section of hair round the brush with the bristles extracted. 3 Keep the brush in the position for 7 to 10 seconds. 4 Turn the knob( in Fig.1) to retract the bristles and remove the brush from your hair. Repeat steps 2-4 to the rest of your hair. 5 When finished, twirl your curled hair around your fingers to tighten your curls. 6 Adjust the curls as you like to get your desired looks. After use: 1 Switch off the appliance and unplug it. 2 Place it on a heat-resistant surface until it cools down. 3 Remove hairs and dust from the appliance and attachments. 4 Clean the appliance and attachments with a damp cloth. 5 Keep the appliance in a safe and dr y place, free of dust. Store the main unit and attachments in the pouch ( in Fig.1). 6 You can also hang it with the hanging loop ( in Fig.1). Note • The pouch is for storing the appliance and attachments. Danger • Avoid misuse of the pouch. Keep the pouch away from babies and children to prevent the danger of suffocation. Guarantee and service If you need more information or if you have any problems, please visit the Philips website at or contact the Philips Customer Care Centre in your countr y (you can find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your countr y, go to your local Philips dealer. All registered and unregistered trademarks are proper ty of their r...
Otros modelos de este manual:hair stylers - HP8656/00 (2.36 mb)