|
Manual de usuario Philips, modelo HP4666/00
Fabricar: Philips Tamaño del archivo: 275.09 kb Nombre del archivo:
Idioma del manual:
|
|
|
|
Enlace gratuito para este manual disponible en la parte inferior de la página
Resumen del manual
Important Read this user manual carefully before you use the appliance and keep it for future reference. • WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water. • Before you connect the appliance, ensure that the voltage indicated on the appliance corresponds to the local power voltage. • Do not use the appliance for any other purpose than described in this manual. • Only use the appliance on dr y hair. Do not use the appliance on ar tificial hair. • Keep the hot surfaces of the appliance away from your skin. • When the appliance is connected to the power, never leave it unattended. • Always unplug the appliance after use. • When the appliance is hot, keep it on a heat-resistant surface and never cover the appliance with anything, such as a towel or clothing. • If you use any accessor y or par t from other manufactures or that Philips does not recommend, your guarantee becomes invalid. • Do not wind the mains cord round the appliance. • If you use the appliance on color-treated hair, the straightening plates may stain. EN • If the mains cord is damaged, you must have it replaced by Philips, a ser vice centre authorised by Philips or similarly qualified persons in order to avoid a hazard. • This appliance is not intended for use by persons (including children) with reduced physical, sensor y or mental capabilities, or lack of experience and knowledge, unless they have been given super vision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be super vised to ensure that they do not play with the appliance. • For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom.This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice. Electromagnetic fields (EMF) This applicance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the applicance is safe to use based on scientific evidence available today. Environment When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. EN Straighten your hair Ensure that you select a temperature setting that is suitable for your hair. Always select a low setting when you use the straightener for the first time. Hair Type Temperature Setting Coarse, curly,hard-to-straighten Mid to High (170 .C and above) Fine, medium-textured or softly waved Low to Mid (160 .C and below) Pale, blonde, bleached or color- treated Low (Below 160 .C) 1 Connect the plug to a power supply socket. 2 Press and hold the button (Fig. 1) until the light on the display is on. » The default temperature setting is displayed. » The SONIC indication turns on. 3 Press the button to select a suitable temperature setting for your hair. » When the straightener heats up to the selected temperature setting, the READY indication turns on. » The remaining usage time of the straightener is displayed. 4 Comb your hair and take a section that is not wider than 5cm for straightening. 5 Place it between the straightening plates and press the handles together. » The sonic vibration star ts. 6 Slide the straightener down the length of the hair in a single motion (max. 5 seconds) from root to end. EN 7 After 20 seconds, repeat step 6 until you achieve the desired look. 8 To straighten the rest of your hair, repeat steps 4 to 7. • To switch sonic vibration off, press the button (Fig. 2) until the SONIC indication turns off. • To resume sonic vibration, press the button again. After you straighten your hair, 1 Disconnect the straightener. 2 Place it on a heat-resistant surface until it cools down. 3 Keep the straightening plates clean and free of dust and dir t. • For storage, you can also hang it with the hanging loop. 3 Guarantee and service If you need information or if you have a problem, please visit the Philips website at or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). EN © Royal Philips Electronics N.V. 2009 All rights reser ved. Specifications are subject to change without notice. Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners. Printed in China...
|