Iniciar sesión:
Votos - 2, Puntuación media: 4.5 ( )

Manual de usuario Asko, modelo W6661

Fabricar: Asko
Tamaño del archivo: 42.69 kb
Nombre del archivo: c3fa82e6-d55b-6fb4-dd39-d9c7dd2aa41c.pdf
Idioma del manual:en
Fotos y especificaciones  Asko  W6661
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


To get the most of the features of your machine, we recommend that you read your Use and Care Guide. THE CONTROL PANELTHE CONTROL PANEL Models W6641 and W661 have ASKO’s state-of-the-art EasyControl™ panel, as illustrated below. To select a wash program, simply press one of the preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs. Preset Programs LCD Window Press one of these buttons to run time. Power Button Press to turn on power to the machine. select a program. Displays the wash program, spin speed, temperature settings, and program Program Selection Controls These buttons allow you to customize the preset program settings, such as wash temperatures, spin speed, rinses, display language, etc. Refer to the Use and Care Guide for instructions. Start/Stop Button Press to start or stop a program. Door Open Button Press to open the glass door. Power Indicator Light Glows when the power is turned on. Power ButtonPower Button The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can open the glass door, set the programs or start the machine. Start/Stop ButtonStart/Stop Button This button starts or stops a program. To stop a program, press and hold this button for a few seconds. If you stop a program using the Start/ Stop button, you will have to reselect a program and press Start/Stop to restart the machine. DooDoor Open Buttonr Open Button If you need to open the door during a program, press and hold Door Open for a few seconds. The machine will stop and automatically drain enough water so the door can be opened safely. The program will resume when you close the door. For instructions on how to open the door manually in case of power failure, refer to your Use and Care Guide. Preset ProgramsPreset Programs This model has four preset programs, as defined in the table below. To select a program, simply press one of the program buttons then press Start. Preset Wash Spin # of Short Long (1) (2) Program Wash Cycle Types of Laundry Temp (1) Speed Rinses Spin Spin P1 Light wash Normally soiled loads 140° F 1600 rpm (3) 5 2 yes P2 Light wash Normally soiled perma press 105° F 1600 rpm (3) 5 2 yes P3 Quick wash Lightly soiled fabrics 105° F 1600 rpm (3) 3 0 yes P4 Hand wash Washable silks, nylon, etc. 85° F 800 rpm 3 1 no NOTES: (1) You can temporarily adjust the temperature settings and spin speed. (See “Temporary Program Changes” below.) (2) These are the maximum spin speed settings allowed for the program. (3) Model W640 has a maximum spin speed of 1400 rpm. You can easily customize the preset programs to best fit your laundry needs. See “Customizing the Preset Programs” in your Use and Care Guide. Temporary Program Changes Temporary Program ChangesTemporary Program Changes You can make temporary changes to the wash temperature and/or spin speed on the preset programs. Simply press the button for the preset program you want to use then follow the instructions below. The settings will revert to normal at the end of the program. Temperature – Press until the desired temperature displays in the LCD window. (The options are 85°, 105°, 120°, 140°, 160°, 175°, and 205°.) If you also want to change the spin speed, read the following paragraph, otherwise, press Start. Spin Speed – Press until the desired spin speed displays in the LCD window then press Start. (The spin speeds advance in 200 rpm increments.) Fabric softener Fabric softener QUICK START PROCEDURESQUICK START PROCEDURES 1. 2. 3. 4. 5. 6. 7. Press the Power button to turn on the machine. Press the Door Open button to open the inner door and load the wash. (The door will open in a few seconds.) Check that the door is clear of laundry then close it firmly. (The door won’t shut if it’s slammed.) Pour the detergent and fabric softener into the proper compartments in the detergent drawer, as illustrated below. (Don’t put detergent in the prewash compartment unless you plan to prewash.) Close the detergent drawer securely. (Do not slam it closed.) Press the button for the desired program. If desired, change the temperature and/or spin speed. Press Start. The machine will start. W6641/W6661 UNDERSTANDING THE LCD WINDOWUNDERSTANDING THE LCD WINDOW The LCD window is easy to read and understand. It displays the wash program selection along with the wash temperature, spin speed, and program run time. The illustration below explains what each item on the LCD window is. THE DETERGENT DRAWERTHE DETERGENT DRAWER The detergent drawer on ASKO washers automatically dispenses the detergent and Prewash detergent Main wash fabric softener at the appropriate times. The drawer is located to the left of the control detergent panel. Simply pull the drawer out and pour the measured amounts of detergent and softener into the proper compartments (as illustrated) and close the drawer. If you use liquid detergent, you will need to use the m...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría