Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
of the recommended amount of detergent in the prewash compartment of the detergent drawer and . of the detergent in the wash compartment. Warning! • If no recommended doses are provided, for delicate items in synthetic fibre use from . to 2/3 of the recommended dose for washing tough cotton fabrics. • Only neutral detergents recommended for wool should be used on the wool programme. • Use the doses recommended by the detergent producer. 4.7 LIQUID DETERGENT DOSES 1. Pour the dose required into the measuring cap supplied with the bottle of liquid detergent and place it in the drum, or use the main wash compartment of the detergent drawer, fitting the insert provided. 2. The scale on the red insert is intended as an aid when deciding the dose of liquid detergent. Warning! • Liquid detergents can be used, at the doses recommended by the producer, only for the main wash, i.e. in all programmes without prewash. 4.8 DESCALERS Descalers can be added to the prewash and main wash compartments as recommended by their producers. Place the detergent in the compartments first, followed by the descaler. 4.9 PROGRAMMES AND FUNCTIONS For advice on selecting programmes in relation to the type of fabric, refer to the "Programmes Table", supplied with this manual. 4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME To switch on the appliance and select the programme, proceed as follows: 1. Turn the programmes knob in either direction. This switches on the washer-dryer. 2. Select the washing programme. The time left to the end of the programme and the maximum recommended weight for the selected programme alternate on the display. The symbols on the display light up to identify the information shown. 3. The default spin speed values are shown. The initial settings can be modified using the button underneath the sequence of spin speeds. 4. If spin speed is set, there will be no spin cycle and the appliance will stop with the tank full. If this value is set the appliance does not perform the final spin and the washing programme ends with water in the tank. Delay Timer Max recommended weight Spin Speed selection EN 12 4.11 SELECTING AND CONFIRMING OPTIONS 1. The Option Selection button can be used to select the following options in sequence (from the top down): Prewash: adds a stage before the main wash, lasting about 20 minutes at a temperature of 35°C. Suitable for loads of particularly dirty items. Intensive: the max. temperature is changed to 60°C and the washing stage is extended to increase the effectiveness of the enzymes in the detergents. Suitable for delicate but dirty items. Easy iron: produces items which are less creased and easy to iron. Water plus: Increases the amount of water used for washing and rinses. In alternative Extra rinse: this option adds a rinse to the selected washing programme. Flexi Time: reduces the duration of the cycle. The symbol is completely illuminated with the initial duration of the selected programme. Once the option has been selected the cycle duration can be further reduced to an intermediate setting and a minimum setting and then returned to the initial duration by repeated pressing of the Set button In alternative Rapid: reduces the duration of the washing cycle. Suitable for small amounts of laundry with only light dirt. Buzzer: sets whether or not the buzzer will sound at the end of the cycle. The appliance comes with the buzzer function "on". 2. To confirm the selected option, simply press the Confirm options button and the LED of the option remains on. 3. To delete an option selection, simply return to the option with the Selection button and press the Confirm options button. To annul all the options previously selected in a single operation, simply hold down the Confirm options button for 4 seconds. 4. The Buzzer option retains its "on" or "off" status for subsequent cycles. It is only automatically switched to "off" if the Night Wash programme is chosen. Option selection Confirm option Options Start Pause EN 13 4.12 TIME REMAINING 1. The Delay Timer can be pressed repeatedly to select the time after which the washing programme will end. The time left before the end of the cycle calculates the initial duration of the washing/drying cycle, the settings made (temperature, spin speed and options) which may shorten or lengthen the cycle's initial duration, and the delay time the user wishes to add before the cycle starts. 2. After the Delay Timer function has been set, the symbol on the display remains on. 3. To annul the Delay Timer function, keep pressing the button repeatedly until the display shows 0. 4. The Start Pause symbol flashes on and off until the cycle starts. After the cycle starts, the symbol remains constantly lit. 4.13 STARTING THE WASHING PROGRAMME 1. To start the washing programme after making your personal settings, press the Start Pause button. 2. Once the cycle has started, the display shows the time remaining before the end of the cycle and the St...