Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Do not exceed the maximum level indicated by the grille, and dilute concentrated fabric softeners. 6 ■ Hotpoint Control panel PROGRAMME knob ON-OFF/CANCEL button with indicator light OPTION buttons and indicator lights WASH CYCLE PHASE START/PAUSE button with indicator light •o o o 0 0 0-0 TEMPERATURE button SPIN SPEED button ECO WASH INTENSITY button ECO indicator light DOOR LOCKED indicator light CHILD LOCK button and indicator light ON-OFF/CANCEL button with indicator light ©: press the button briefly to switch the machine on or off. The green indicator light shows that the machine is switched on. To switch the washing machine off during a wash cycle, press and hold the button for approximately 2 seconds; pressing the button quickly or accidentally will not switch the machine off. If the machine is switched off during a wash cycle, the programme will be cancelled. PROGRAMME knob: this can be rotated in both directions. To set a more suitable programme, please refer to the "Table of Programmes'. The knob is locked into position during the wash cycle. TEMPERATURE (j) button: press this button to adjust the temperature; the value will be indicated by the indicator lights above it (see "Running a wash cycle']. SPIN SPEED (OJ button: press this button to adjust the spin value or to exclude this part of the programme; the value will be indicated by the indicator lights above it (see "Running a wash cycle']. WASH INTENSITY Xitl button: press this button to adjust the wash intensity; the value will be indicated by the indicator lights above it (see "Running a wash cycle“]. OPTION buttons and indicator lights: may be used to select any of the available options. The indicator light corresponding to the selected option will remain lit (see "Running a wash cycle']. WASH CYCLE PHASE icons: these light up to provide an indication of the progress of the wash cycle (Wash I¡¿J - Rinse - Spin ©1 - Pumpout fep/]. The text END lights up when the cycle has finished. START/PAUSE button with indicator light: when the green indicator light flashes slowly, press the button to start the wash cycle. When the cycle has started, the indicator light is illuminated in a fixed manner. To pause the wash cycle, press the button again; the indicator light will turn orange and begin to flash again. If the "Door Locked“ t-O indicator light is off, the porthole door may be opened. To restart the wash cycle from the point at which it was interrupted, press the button again. DOOR LOCKED •s-O indicator light: this indicates that the porthole door is locked. To open the door, pause the wash cycle (see following page]. CHILD LOCK & button and indicator light: this is used to enable or disable the "Child lock“ function, by pressing the button for approximately 2 seconds. When the indicator light is illuminated, the control panel is locked. This avoids accidental changes being made to the wash cycles, especially where children are at home. ECO indicator light: the ECO icon lights up when the electricity saving reaches at least 10% (this can be achieved by adjusting the wash cycle settings]. 7 Running a wash cycle Note: the first time you use the washing machine, add detergent and run an empty 90oC cotton wash cycle without the pre-wash phase. 1. SWITCH ON THE MACHINE. Press the © button. All the indicator lights will illuminate for 1 second, after which the light corresponding to the © button will remain lit constantly, while the START/PAUSE indicator light will flash slowly. 2. LOAD THE LAUNDRY. Open the porthole door. Load the laundry, making sure that the maximum load quantity indicated in the table of programmes (below] is not exceeded. 3. MEASURE OUT THE DETERGENT. Pull out the drawer and pour the detergent into the relevant compartments as described in "Description of the machine". 4. CLOSE THE PORTHOLE DOOR. 5. CHOOSE THE PROGRAMME. Turn the PROGRAMME knob left or right to select the required programme, to which a set temperature, spin speed and wash intensity are linked (these values may all be modified]. 6. PERSONALISE THE WASH CYCLE. Use the relevant buttons on the control panel: , •'•“X Q) Qj Modify the temperature and/or the spin speed. The machine automatically selects the temperature and the maximum spin speed for the programme set and these values may not be increased. By pressing the GK> button, the temperature can be progressively reduced or even set to cold wash (NO HEAT]. By pressing the (0^ button, the spin speed can be progressively reduced or even eliminated altogether (NO SPIN]. If the buttons are pressed again the maximum values are restored. ! Exception: if the "WHITES" programme is selected, the temperature can be increased up to a value of 90OC. Xib Adjust the intensity of the wash. The machine automatically selects the optimal wash cycle intensity for a normal level of soiling in relation to the programme selected. It is nevertheless possible to increase (for...