Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
• Leave the loading door open during extended periods of non-use to allow the wash drum to dry out and avoid a musty smell. Refer to the INSTALLATION INSTRUCTIONS for proper procedures whenever the washer is moved. Cleaning Foreign Object Trap FLW2182NShock Sleeves Bolts and Lockwashers Motor Mount Hooked End of Shipping Brace Filter Screens Check the filter screens in the fill hoses for debris or damage annually. Clean or replace them if necessary. If the washer is filling with water slower than normal, check the filter screens. Clean or replace them if necessary. Order filter screen Part No. F270300 from the nearest authorized parts distributor. Vacations and Extended Non-Use • To avoid possible property damage due to flooding, turn off the water supply to the washer whenever there will be an extended period of non-use. • Leave the loading door open during extended periods of non-use to allow the wash drum to dry out and avoid a musty smell. Refer to the INSTALLATION INSTRUCTIONS for proper procedures whenever the washer is moved. Cleaning Foreign Object Trap FLW2182NShock Sleeves Bolts and Lockwashers Motor Mount Hooked End of Shipping Brace Reinstallation of Shipping Materials To prevent damage while moving the unit, the shipping materials MUST be reinstalled. • Disconnect washer from electrical supply. • While supporting the front access panel, remove two screws from the bottom edge of the panel. • Gently lower the panel to remove it from the washer. • Place the shock sleeves on all four shock absorbers. Refer to the illustration below. • Insert hooked end of shipping brace into the open slot of the motor mount. • Attach the brace with the five bolts and washers. Refer to the illustration below. • Reinstall front access panel. The washer’s pump has a trap that may collect foreign objects. The trap may need to be cleaned if water is draining slower than usual. To clean: • Disconnect washer from electrical supply. • While supporting the front access panel, remove two screws from the bottom edge of the panel. • Gently lower the panel to remove it from the washer. NOTE: The pump may have some water in it. Use a rag or a container to catch water. If the wash drum is full of water, use a wet/dry shop vacuum to catch the water. • With rag or vacuum ready, unscrew the cap on the left side of the pump and remove trap. • Clean the debris from the trap. • Reinstall the trap and access panel. • Reconnect washer to electrical supply. -28 802753 Preventative Maintenance Follow these guidelines to ensure the washer operates properly. Call for service if you observe any of the following: water of any amount on the floor, an increase in operating noise or water remaining in the wash basket after a cycle. Frequency Maintenance Procedure Monthly 1. Check all hoses and the drain for leaks. 2. Check the door lock for proper operation. 3. Clean the dispenser drawer. Refer to Using Your Dispenser Drawer. 4. Check to make sure the washer is level. Every six months ...
Otros modelos de este manual:Lavadoras - DRY2035N (3.79 mb)
Lavadoras - FLW2169N (3.79 mb)
Lavadoras - FLW2170N (3.79 mb)
Lavadoras - FLW2171N (3.79 mb)