Iniciar sesión:
Votos - 5, Puntuación media: 4.2 ( )

Manual de usuario LG, modelo WD-10492SV

Fabricar: LG
Tamaño del archivo: 1.7 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


* Basic time is minute i Drain -60 sec. * The * ~ Time for varies as the temperature or the amount of laundry water temperature or ambient te . Pre Wash : •If the laundry is heavily soiled, “Pre Wash” course is effective. . Time Save : • This option can be used to reduce the time of a wash program. • To use this option press the Time Save button once before the wash program is started. • This option is not available with Quick 30 program. . Rinse+ : • Used to additional rinse, which may assist in removing traces of detergent residue. • By selecting Rinse+ function, the rinse time and the rinse water are increased. . Crease Care : • If you want to prevent crease, select this button with spin speed. . Bio : • If you want to eliminate protein stains (milk, blood, chocolate...), you may select Bio function by pressing the option button. 12 7-1. BEFORE PERFORMING SERVICE ¦ Be careful of electric shock or disconnecting the parts while troubleshooting. ¦ Voltage of each terminal in 220-240V~ and DC while applying an electric current. 13 7. TROUBLESHOOTING 7-4.HOW TO KNOW THE WATER LEVEL FREQUENCY Press the Temp. and Spin button simultaneously. ex) 241 : Water level frequency = 241. 10-1kHz =24.1kHz The digits means water level frequency (10-1 kHz) Checking Point None All lamps turn on 1 time Clockwise spin (right) Motor rpm (About 45) 2 times Low speed Spin Motor rpm (About 63~67) 3 times High speed Spin Motor rpm (About 79~85) : WD-80480S/N/T, 80490S/N/T Motor rpm (About 95~106) : WD-10480S/N/T, 10490S/N/T 4 times Inlet valve for pre-wash operation Water level frequency (25~65) 5 times Inlet valve for main-wash operation Water level frequency (25~65) Hot inlet valve in case of hot water fill 6 times Inlet valve for main-wash operation Water level frequency (25~65) 7 times Counterclockwise spin (left) Motor rpm (About 45) 8 times A Heater is in operation for 3 sec. Water Temperature 9 times Draining pump operation Water level frequency 10 times Auto off operation 7-2. QC TEST MODE. . Pressing Option and Time button simultaneously. . Power supply ON with pressing upper two button. . Press the START/PAUSE button as follows. ~Press the START/PAUSE button more 4 times until stop spinning. Pressing number of START/PAUSE button 7-5.ERROR DISPLAY. . If you press the [Start/Pause] button when an error is displayed, any error except S/W ERROR will disappear and the machine will change into pause status. . In case of , , , if the error is not resolved within 20 sec. In the case of other errors, if the error is not resolved within 4 min. power will be turned off automatically and the error code will be blinked. But in case of , power will not be turned off. ERROR SYMPTOM CAUSE 1 WATER INLET ERROR Water has not reached to the pre-set level within 4 min. since inlet valve operated, or water has not reached to the normal level within 25 min. 2 IMBALANCE ERROR The appliance is tilted. Laundry is gathered to one side. Non distributable things are put into the drum. 3 D...

Otros modelos de este manual:
Lavadoras - WD-10480N (1.7 mb)
Lavadoras - WD-10480NV (1.7 mb)
Lavadoras - WD-10480S (1.7 mb)
Lavadoras - WD-10481N (1.7 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría