Votos - 5, Puntuación media: 4.4
(
)
)
|
Resumen del manual
This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance. • Do not use an adapter or otherwise defeat the grounding plug. • If you don’t have the proper outlet, consult an electrician. WARNING :Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician. 4 Name : Front loading washing machine Power supply : 220 - 240 V~, 50 Hz Size : 600 mm(W) 590 mm(D) 850 mm(H) Weight : 63 kg Max.Watt : 2100 W 0.33 W (The off-mode, The left-on mode) Wash capacity : 8 kg Water consumption : 53 l Permissible water pressure : 100 - 1000 kPa (1.0 - 10.0 kgf / cm2) The appearance and specifications may vary without notice to improve the quality of the unit. 5 S pecifications Accessories Drawer (For detergent and fabric softener) Drain hose Transit bolts Power plug Control panel Drain pump filter Lower cover cap • If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid a hazard. Drum Door Drain plug Adjustable feet Inlet hose(1EA) Spanner nstallation I Removing packing Washer Base Packing Spanner 1. Remove the cardboard box and styrofoam packing. 2. Lift the washing machine and remove the base packing. 3. Remove the tape securing the power supply cord and drain hose. 4. Remove the inlet hose from the drum. Keep the spanner in base packing for leveling. Warning Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children. Removing transit bolts To prevent internal damage during transport, the 4 special bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. If they are not removed, it may cause heavy vibration, noise and malfunction. 6 Transit bolt 1. Unscrew the 4 bolts with the spanner supplied. 2. Take out the 4 bolts along with the rubber bungs by slightly twisting the bung. Keep the transit bolts for future use. 3. Close the holes with the caps supplied. I nstallation Installation place requirements Washer approx. 2cm Location • Level floor : Allowable slope under entire washer is 1. • Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance. • Additional Clearance : For Wall, 10cm:rear / 2cm : right & left side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls. Positioning • Install the washer on a flat hard floor. • Make sure that air circulation around the washer is not impeded by carpets, rugs, etc. • Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washer. • If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance. • The washer must not be installed in rooms where the temperature can drop below 0°C. • Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown. • With the washer installed, adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and the underside of any work-top. • This equipment is not designed for maritime use or for use in a mobile installations such as caravans, aircraft etc. Electrical connection • Do not use an extension cord or double adapter. • If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. • Always unplug the machine and turn off the water supply after use. • Connect the machine to an earthed socket in accordance with current wiring regulations. • The appliance must be positioned so that the plug is easily accessible. • Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center • Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point. • If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing machine at room te...